712422
11
Zoom out
Zoom in
Previous page
1/74
Next page
very hot during ironing.
e appliance operates at very high z
temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts
of the housing or the sole plate and from
hot water or steam. Do not allow steam to
escape in the direction of anyone nearby.
When operating the appliance, hold only z
by the handle.
Do not attempt to iron or to smooth out z
wrinkles or creases from clothes by using
the steam jet function while wearing
them.
Do not  ll the reservoir with any liquid z
other than water.
Always switch the appliance o and z
remove the plug from the wall socket
before the water reservoir is removed;
this will prevent the appliance from being
damaged.
Do not allow the power cord to touch z
hot surfaces, and do not coil it round the
appliance.
Always remove the plug from the wall z
socket
a er use, -
in case of any malfunction, -
during cleaning, -
while re lling, when the reservoir is -
removed.
When removing the plug from the wall z
socket, never pull on the power cord;
always grip the plug itself.
is appliance is not intended for use by z
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure z
that they do not play with the appliance.
Caution: z Keep any packaging materials
well away from children: there is a risk of
su ocation.
No responsibility will be accepted if z
damage results from improper use, or if
these instructions are not complied with.
is appliance is intended for domestic use z
only and not for commercial applications.
In order to comply with safety regulations z
and to avoid hazards, repairs of electrical
appliances must be carried out by quali ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service departments.  e
address can be found in the appendix to
this manual.
Filling with water
Before the steam function can be used, the
reservoir must be  lled with water in the
following way:
switch o the generator and remove the -
plug from the wall outlet;
press the reservoir release button and take -
o the reservoir to the rear;
ll the reservoir with clean tap water, -
observing the ‘Max’ marking;
replace the reservoir in the generator, -
ensuring it locks into place.
Adjusting the level of water hardness
Before the appliance is used for the  rst time,
or when it is used in a new location with a
di erent degree of water hardness, the iron
should be adjusted to the appropriate hardness
level :
Press the
button to enter the water-
hardness adjustment mode.
Use the + and – buttons to select the
hardness level:
Hard
Medium
So
Should you be unsure about the hardness of
the water in your area, please enquire of the
relevant local authority department.
Press the
button again to con rm the
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BA-3286 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3286 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info