712422
10
Zoom out
Zoom in
Previous page
1/74
Next page
Steam Generator
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference.  e appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
e appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label of the appliance.
is product complies with all binding CE
labelling directives.
Familiarisation
1. Safety holder for connecting hose
2. Handle
3. Temperature control (adjustable)
4. Connecting hose with swivelling non-
kink cover
5. Indicator light - iron
6. Base stand (rear)
7. Power cord with plug
8. Side holder for connecting hose
9. Rating label (underneath steam
generator)
10. Maintenance screw
11. ‘+’ button
12. ‘−' button
13.
button (water hardness)
14. On/O switch
15. Display
16. Iron rest (on steam generator)
17. Sole plate
18. Water reservoir
19. Water ll hole
20. Water reservoir release button
21. Iron
22. Steam button
23. Spray assembly
Important safety instructions
Remove any packaging materials from the z
appliance.
Before the appliance is used, the main z
body including the power cord as well as
any attachment tted should be checked
thoroughly for any defects or leakage.
Should the appliance, for instance, have
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse e ects on the
operational safety of the appliance.
e power cord should be regularly z
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive z
strain has been put on the connecting
hose or the power cable. Damage cannot
always be detected from the outside; the
entire unit should therefore be checked
by a quali ed technician before it is used
again.
Always place the appliance on a  at, z
level and heat-resistant surface during
operation. Do not put it on or near hot
surfaces or open  ames such as hot-plates
or gas rings.
Great care is necessary when using any z
appliance, especially near children. Do
not leave the appliance unattended while
connected. Always remove the plug from
the wall socket and place the iron back on
its rest on the steam generator.
When ironing is interrupted, the iron z
must be replaced on its rest on the steam
generator.
e iron must be used and stored on a z
stable and durable surface only.
With the iron placed on its rest on the steam z
generator, ensure that this too is on a stable
and durable surface.
Never open the maintenance screw in the z
bottom of the steam generator unless the
appliance has completely cooled down.
Caution: We strongly recommend that you
allow the unit to cool down over night.
Caution: z the connecting hose can become
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BA-3286 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3286 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info