753086
14
Zoom out
Zoom in
Previous page
1/308
Next page
Installation instructions, only for experts p. 14/38
Fig. 2: Wave.com4 11 kW power unit
Basic module
WC4-B-11
Expansion board
WC4-H-PCB
(optional)
4.4. Installing the expansion board (optional)
1. Connecttheexpansionboardtothebaseboardusingthepre-congured
cables (L-N-PE) and the ribbon cable.
2. Fasten the expansion board in place using the screws provided.
4.5. Installing the control unit
Install the control unit 2 on the cabin wall no more than 10 metres from the power
unit 1. Pay attention to how the data cable is routed.
ATTENTION!
Damage to the unit
The control unit 2 for the sauna controller is splash-proof (IP code IPX4).
Only use a manual screwdriver for installation. Using a cordless screwdriver
may irreparably damage the housing.
For installation inside the sauna cabin, maintain a distance of at least 30 cm
to the ceiling.
1. Cut the recess for the control unit, for example using a Ø 70 × 35 mm hole
cutter.
2. Connect the 4-pin plug to the RJ10 socket on the control unit.
3. Screw the housing to the cabin wall by screwing the 4 wood screws supplied
through the hole.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec wave.com4 11 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec wave.com4 11 kW in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info