753086

Sentiotec wave.com4 11 kW Manual

12
Zoom out
Zoom in
Previous page
1/308
Next page
Instructions for installation and use p. 12/38
Two-sensor mode with humidity/temperature sensor (FTS2)
(optional – with expansion board)
In two-sensor mode with humidity/temperature sensor, the sauna controller
displays the temperature measured by the humidity/temperature sensor as the
actual temperature.
In two-sensor mode with humidity/temperature sensor, the evaporator is regulat-
ed according to the humidity level measured in the cabin. The sauna controller
displays the actual humidity (in % relative humidity) in the sauna cabin.
Two-sensor mode with bench sensor (F2)
(optional – with expansion board)
In two-sensor mode with bench sensor, a second temperature sensor (bench
sensor) is installed above the rear sauna bench. The sauna controller displays
the temperature measured by the bench sensor as the actual temperature.
In two-sensor mode with bench sensor, the humidity is timed. Only the setpoint
for the humidity (in % relative humidity) is shown on the sauna controller display.
The actual humidity in the sauna cabin when the humidity is timed depends on
thesizeofthecabinandtheevaporatoroutput,andmaydi󰀨erfromthesetpoint.
Two-sensor mode with humidity sensor (WC4-H-H)
(optional – with expansion board)
In two-sensor mode with humidity sensor, the sauna controller displays the tem-
perature measured by the heater sensor as the actual temperature. The evap-
orator is regulated according to the humidity measured in the cabin. The sauna
controller displays the actual humidity (in % relative humidity) in the sauna cabin.
Three-sensor mode with bench sensor (F2) and humidity sensor (WC4-H-Hx)
(optional – with expansion board)
In three-sensor mode with bench sensor and humidity sensor, the sauna controller
displays the temperature measured by the bench sensor as the actual temperature.
In three-sensor mode, the evaporator is regulated according to the humidity
measured in the cabin. The sauna controller displays the actual humidity (in %
relative humidity) in the sauna cabin.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec wave.com4 11 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec wave.com4 11 kW in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info