753050
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
Operating instructions for the user 9
Sauna operation
7 Automatic operation
7.1 Switching on the sauna control
1. Press ON/OFF 1.
- The LEDs C - F light up for approx. 5 seconds.
- The LED of the previously selected bath, SAUNA
H or CLIMATE A lights up.
- The display 6 indicates the current time
(e.g.16:30 hours):
16:30
7.2 Setting to sauna operation
1. Press Sauna H.
- The LED of Sauna H lights up.
- The display 6 indicates the current time.
- The LED AUTOMATIC 5 does not light up.
7.3 Select the start of heating [00:00 - 23:59
hours]
WARNING - Fire hazard:
Prior to turning the sauna control to auto-
matic operation make sure that no com-
bustible objects have been placed on top
of the stove.
1. Press UP/DOWN buttons 8 until LED START F
lights up:
The display 6 indicates:
OFF
or the value set previously.
2. Press PROG/OK 9:
- The display 6 flashes:
OFF
or the value set previously.
3. Use the UP/DOWN buttons 8 to enter the desired
value, e.g. [18:00].
- The display 6 flashes:
18:00
Sauna operation
7 Automatic operation
Continued
4. Press PROG/OK 9:
- The display 6 indicates:
18:00
- The LED AUTOMATIC 5 lights up.
- The automatic start time for heating has been set.
Note - Deactivating the start of heating:
Turn ON/OFF switch 1 off and on again to deactivate
the automatic start of heating. The LED AUTOMATIC
5 goes out or
press the operating mode SAUNA H or CLIMATE A
again. The LED AUTOMATIC 5 goes out.
7.4 Entering the heating duration (00:00 -
06:00)
1. Press UP/DOWN buttons 8 until the LED TIME
E lights up:
- The display 6 indicates (in standby):
STOP
- or the remaining operating time while in heating
operation.
2. Press PROG/OK 9:
- The display 6 flashes:
06:00
or the value set previously.
3. Use the UP/DOWN buttons 8 to enter the desired
value, e.g. [02:30].
- The display 6 flashes:
02:30
4. Press PROG/OK 9:
- The display 6 indicates (in standby):
STOP
or the new heating duration entered during hea-
ting operation.
- The heating duration has been set.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 3 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info