753050
49
Zoom out
Zoom in
Previous page
1/56
Next page
49
Operating instructions for the user 9
Sauna operation
7 Automatic operation
Continued
7.8 After automatic operation
The automatic heating operation (see chapter 7.2) is
always activated only once for reasons of safety.
If you would like activate the sauna control again using
the same settings:
Press UP/DOWN buttons 8 until the LED “Start”
F lights up.
The display 6 indicates:
OFF
or the previously set start time.
Press PROG/OK 9 once.
The display 6 flashes the automatic start time.
Press PROG/OK 9 once.
The display 6 stops flashing.
- The LED AUTOMATIC 5 lights up.
The selected operating mode SAUNA H or CLI-
MATE A is activated.
If you would like activate the sauna control again using
changed settings:
see chapter 7 ff
7.9 Activating automatic operation
There is another way to activate automatic operation
(item 7.8) using the set values.
Press SAUNA H for sauna operation or CLI-
MATE A for climate operation and hold down for
3 seconds.
- The LED AUTOMATIC 5 lights up.
Sauna operation
7 Automatic operation
Continued
7.7 View/Change settings
You can view and change the temperature settings,
heating duration and fan settings while the sauna is
in operation.
7.7.1 Change/View target values
1. Press PROG/OK 9:
In display 6 the respective, current setting will
flash.
2. Use the UP/DOWN buttons 8 to enter the desired
value or to view the set value
3. Press PROG/OK 9:
The new value has been set.
7.7.2 Shutting down the program manually
While heating:
Press START/STOP 7:
- The sauna heater turns off.
- The LED HEAT 4 goes out.
- The control is in standby mode.
7.7.3 Automatic shut-down
The sauna control switches off the heater automatically
once the set heating time (see chapter 7.3) has lapsed.
- You will hear a continuous beep for 10 seconds.
- The LED HEAT 4 goes out.
- The control is in standby mode.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 3 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info