753050
46
Zoom out
Zoom in
Previous page
1/56
Next page
46
Operating instructions for the user 9
Sauna operation
6 Manual operation, quick-start
Continued
6.3 Entering the heating duration (00:00 -
6:00)
1. Press UP/DOWN buttons 8 until the LED TIME
E lights up:
The display 6 indicates (in standby):
STOP
or the remaining heating time while in operation.
2. Press PROG/OK 9:
The display 6 flashes:
06:00
or the value set previously.
3. Use the UP/DOWN buttons 8 to enter the desired
value, e.g. [02:30].
The display 6 flashes:
02:30
4. Press PROG/OK 9:
The display 6 indicates (in standby):
STOP
or the new value entered while in heating opera-
tion.
The heating duration has been set.
6.4 Starting the sauna control
1. Press START/STOP 7:
The display 6 indicates the remaining heating
time, e.g.:
02:30
The heater starts heating.
The LED 4 lights up.
6.5 View/Change settings
You can view and change the temperature settings,
heating duration and fan settings while the sauna is
in operation.
Sauna operation
6 Manual operation, quick-start
Continued
6.5.1 How to change target values
1. Press PROG/OK 9:
In display 6 the respective, current setting will
flash.
2. Use the UP/DOWN buttons 8 to enter the desired
value.
3. Press PROG/OK 9:
The new value has been set.
6.6 Switching off the sauna control
6.6.1 Manually
Press START/STOP 7:
The sauna heater turns off.
The LED HEAT 4 goes out.
The control is turned off.
6.6.2 Automatically
The sauna control automatically switches of the heater
when the set heating time has lapsed (see chapter 6.3).
- You will hear a continuous beep for 10 seconds.
- The LED HEAT 4 goes out.
- The control is turned off.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 3 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info