735538
8
Zoom out
Zoom in
Previous page
1/14
Next page
6d1
The present
MIN value in
% of FS
no
Increase the MIN value by stepping with the MENU(+) button.
Decrease by stepping with the ESC(-) button. The output is set to
the MIN value and can be checked with a multimeter.
6e1
Sure
no
The adjustment is saved by pressing Entr(+-). Press ESC to return
without saving.
6c2
SetH
no
Leads to adjustment of the MAX value
6d2
The present
MAX value in
% of FS
no
Increase MAX value by stepping with the MENU(+) button. Decrease
by stepping with the ESC(-) button. The output is set to the MAX
value and can be checked with a multimeter.
6e2
Sure
no
The adjustment is saved by pressing Entr(+-). Press ESC to return
without saving.
7
CALb
yes
Background calibration of the CO sensor and the CO
2
-sensor
with fresh air. An easy way to correct the zero point error. The
sensor needs fresh air (380-420 ppm CO
2
). The calibration must be
confirmed by pressing Entr(+-). The CO
2
sensor is calibrated to 400
ppm CO
2
and the CO sensor to 0 ppm CO.
7a
Sure
yes
Confirm that a background calibration shall be done.
8
CAL
yes
Zero point calibration of the CO sensor and the CO
2
sensor. The
sensor needs zero gas. See the zero point calibration instruction.
The calibration must be confirmed by pressing Entr(+-).
8a
Sure
yes
Confirm that a zero point calibration shall be done.
Table IV. Maintenance functions available on aSENSE mIII to set output limits. Time limit refers to an
internal time-out that returns the LCD and maintenance function back to normal. ENTER is a
simultaneous pressing on MENU and ESC.
PLEASE NOTE! If a power failure happens when the sensor has Out(1)...(4) locked to min/max limits,
then the sensor will have this output locked when the power returns. It is necessary to enter this menu
item and release the output manually!
EXAMPLE I:
Setting of the MAX value of the analogue outputs
The access code is time limited. If the time limit is exceeded the sensor returns to DEFAULT.
ENTR =MENU(+) and ESC(-) are pushed simultaneously.
1. At the start of the setting the sensor is in DEFAULT.
2. Push MENU(+) once to reach the error code. The display shows E + the error code number.
No error is shown as E000.
3. Push MENU(+) once. The display shows the CO set point e.g. 35.
4. Push ENTR(+-) once. The display shows EC and two digits. Enter the access code to the
service menu. If the default code is used do like this: Push MENU(+) until the digits stop. The
display shows EC55. If the correct code is not entered before the time limit exceeds the
sensor returns to DEFAULT.
5. Push ENTR(+-) once. The display shows SPCO to set the CO set point.
6. Push MENU(+) once to reach the carbon dioxide set point. The display shows SP C.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Senseair aSENSE M III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Senseair aSENSE M III in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Senseair aSENSE M III

Senseair aSENSE M III Installation Guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info