735538
10
Zoom out
Zoom in
Previous page
1/14
Next page
EXAMPLE II:
Setting of set points for carbon monoxide concentration and carbon dioxide concentration, the
MAX and MIN values of the analogue outputs and calibration of the sensor
The access code and the recalibration of the sensor are time limited. If the time limit is exceeded the
sensor returns to DEFAULT.
ENTR =MENU(+) and ESC(-) are pushed simultaneously.
1. At the start of the setting the sensor is in DEFAULT.
2. Push MENU(+) once to reach the error code. The display shows E + the error
code number. No error is shown as E000.
(Push ESC(-) to return to DEFAULT if requested
3. Push MENU(+) once. The display shows the CO set point e.g.
35 ppm and the carbon dioxide set point e.g. 750ppm.
(Push ESC(-) to return to DEFAULT if requested.)
4. Push ENTR(+-) once. The display shows EC and two digits. Enter the access code to the
service menu. If the default code is used do like this: Push MENU(+) until the digits stop. The
display shows EC55. If the correct code is not entered before the time limit exceeds the
sensor returns to DEFAULT.
5. Push ENTR(+-) once. The display shows SPCO to set the carbon monoxide set point.
6. Push ENTR(+-) once. The display shows the carbon monoxide set point e.g. ex 35 ppm. Push
MENU(+) to increase the set point value in steps of 1 ppm.
Push ESC(-) to decrease the set point value in steps of 1 ppm.
7. Push ENTR(+-) once when the set point is set. The display shows SPCO.
Push ESC(-) to return to DEFAULT.
8. Push MENU(+) once to reach the carbon dioxide set point.
The display shows SP C.
9. Push ENTR(+-) once. The display shows the carbon dioxide set point e.g. 750 ppm. Push
MENU(+) to increase the set point value in steps of 50 ppm.
Push ESC(-) to decrease the set point value in steps of 50 ppm.
10. Push ENTR(+-) once when the set point is set. The display shows SP C.
Push ESC(-) to return to DEFAULT.
11. Push MENU(+) once to reach the setting of analogue outputs.
The display shows AOUt.
12. Push ENTR(+-) to reach the output to be set. The display shows An and two digits e.g. An 01.
Step to the requested output by pushing MENU(+).
13. Push ENTR(+-) to reach the setting of the MIN value. The display shows Set L.
14. Push ENTR(+-) to set the MIN value of the output. The display shows the numerical value in
% e.g. the standard setting 0.0 % or previously set value. Push MENU(+) to increase the MIN
value. Push ESC(-) to decrease the MIN value. Push ENTR(+-). The display shows Sure.
Push ENTR(+-) to save the setting and return to Set L. Push MENU(+) or ESC(-) to return to
Set L without saving the new setting.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Senseair aSENSE M III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Senseair aSENSE M III in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Senseair aSENSE M III

Senseair aSENSE M III Installation Guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info