735538
12
Zoom out
Zoom in
Previous page
1/14
Next page
Test gas verification
If the measurement of a sensor is to be verified, a test gas with carefully determined concentration of
CO and CO
2
must be used. For zero calibration pure nitrogen or air that has passed through a
chemical absorber should be used. In fresh air the carbon monoxide concentration is nearly zero. The
Zero calibration kit can be used to produce carbon dioxide free air. Check the CO and CO
2
values of
the display or the voltage of the output 1 for CO and the voltage of the output 2 for CO
2
with a
multimeter when the values have stabilized.
When a zero calibration shall be executed a plastic tube with 2.2 mm outer diameter and 0,8 mm inner
diameter shall be inserted in marked holes of the sensor. Plastic tubing is connected to the tube. The
gas flow should be between 0.3 and 1.0 l/min.
The yellow LED flashes when a calibration is executed .A calibration will only be executed if the gas
concentration is stable. If the yellow LED does not flash after 8 seconds no calibration has been
executed. Then try to do another calibration.
Marking
Function
CALb CO2
Background calibration = CO
2
sensor calibration with fresh air. An easy way to
correct the zero point error. The sensor needs fresh air (380-420 ppm CO
2
). The CO
2
sensor is calibrated to 400 ppm CO
2
.
CAL CO
Zero point calibration of the CO sensor with fresh air. The CO sensor is calibrated to
0 ppm CO
Figure 11 The PCB with the calibration jumper in default position. An enlarged part of the PCB with
marked gas inlets and jumper positions for calibration is shown at right.
PLEASE NOTE!
The sensor accuracy is defined at continuous operation (at least 3 weeks after installation)
ESC
MENU
ESC
MENU
Gas inlet CO2
Gas inlet CO2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Senseair aSENSE M III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Senseair aSENSE M III in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Senseair aSENSE M III

Senseair aSENSE M III Installation Guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info