781864

Scheppach Wox D 700SL Manual

25
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58 www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
25GB
12.4 Handling the protection cage (Wox d 700sl)
Handling the protection cage
• Open the protective cover (1).
• Insert the material to be cut (2).
• Close the protective cover (1).
• Always x the material to be cut (2) with a handle (3).
• Swivel the rocking frame (4) to the saw blade and saw through the material to be cut.
• Swivel the rocking frame (4) back and open the protective cover.
• Add more material to be cut and close the protective cover again
13. Sawing operation
1 After the machine has been switched on, wait until the saw blade has reached full speed.
2 Put the wood on the rocker.
3 Take hold of both handle bars of the rocker with both hands and lead it evenly to the saw blade; thus the saw blade
is revealed.
4 Push the rocker evenly to ensure the engine speed does not drop.
5 Remove the wood from the rocker after it has returned to the initial position and the saw blade is covered. Then
place the next workpiece.
m Attention!
• Do not leave the machine unattended during operation.
• Turn off the machine when not working and pull the mains plug and spark plug.
End of work
• Switch off the drive motor with the On/Off switch.
• Wait until the blade has completely stopped.
• Unplug the power cord
• Observe general maintenance instructions.
• Place the jack in the transport position and secure it with the locking lever.
14. Maintenance and service
m Perform maintenance, modication, adjustment and cleaning work only with the engine switched off and the
mains plug or spark plug connector is unplugged.
• Keep the manual at the machine.
• Keep machine clean.
• Wear protective goggles when cleaning.
Before undertaking any maintenance or checking work, the working area must be cleaned. Keep the necessary tools
within the reach of your hand.
Clean the panels, screens and control levers with a soft cloth. The cloth should be dry or slightly humid with a neutral
cleaning agent. Do not use any solvents like alcohol or benzene as they could damage the surfaces.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Wox D 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Wox D 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info