781864
27
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58 www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
27GB
17. Troubleshooting
Problem Possible Cause Help
Saw blade gets loose
after turning off the
motor
1. Fastening nut tightened
insufciently
1. Tighten fastening nut, right-handed thread
Motor does not start. 1. Failure of mains fuse
2. Extension cable defective
3. Connections at the motor or switch
out of order
4. Motor or switch defective
1. Check the mains fuse.
2. Replace defective extension cable
3. Check with the help of an electrician
4. Check with the help of an electrician
Motor does not work,
the fuse responds
1. Cross-section of the extension
cable is not sufcient
2. Overload due to blunt saw blade
1. Refer to Electrical Connection
2. Replacing the saw blade
Burnt areas on the
cutting surface
1. Blunt saw blade
2. Incorrect saw blade
1. Sharpen/replace saw blade
2. Replace saw blade
The saw does not
brake when switching
the machine off
1. Mechanical brake is defective 1. Have the brake replaced.
Motor runs erratically 1. Switch defective
2. Extension cable defective
1. Contact the service department
2. Replace extension cable / have this checked by an
electrician.
Overheated engine 1. Air ow restricted. 1. Do not cover the drive motor with objects.
m Electrotechnical maintenance works should only be carried out by an electronics technician!
16. Disposal and recycling
On removal of the machine the local legal regulations
have to be abided by.
Please contact the manufacturer in case of disposal.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing
to the effective use of natural resources. You can
obtain information on collection points for waste
equipment from your municipal administration, pub-
lic waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Wox D 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Wox D 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info