Manual Scheppach Wox D 700SL (page 26 of 48) (English, German, French)

781864

Zoom out

Zoom in

1/48

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 GB

Keep oils and lubricants out of reach of unauthor-

ised persons. Read through the instructions on the

containers carefully and follow them closely. Avoid

direct contact with the skin and wash off thoroughly

after use.

m Check all safety devices after maintenance

and cleaning work.

Maintenance

Turn the engine off and let the engine cool down.

Re-t the mains plug.

Check the general condition of the machine. Be care-

ful with loose screws, misaligned or moving parts,

breakage of parts, and any other condition that could

interfere with safe operation.

Remove any foreign objects and other materials

that have accumulated on the saw blade and the

unit. Clean the machine after each use. Then use a

high-quality and thin uid machine oil to lubricate all

moving parts.

m Never use a “pressure washer” to clean your

unit. Water can penetrate tight areas of the

machine and its transmission case and cause

damage to spindles, gears, bearings, or the

engine. The use of pressure washers will result

in shortened life and reduce serviceability.

Experienced craftsmen can perform minor repairs

on the machine itself.

• Check the saw blade regularly. Use only

well-sharpened, crack-free and not distorted saws.

Use only tools that comply with the European

standard EN 847-1.

• Exchange immediately rocker that run out.

• Check all safety installations after each mainte-

nance and cleaning activities.

• Ensure that there are no tools or other materials on

or in the machine before putting it into operation.

• Remove possible sawdust blockages at the dis-

charge.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the

following parts are therefore also required for use

as consumables.

Wear parts*: sawblade; seesaw inserts

* Not necessarily included in the scope of delivery!

15. Exchange of saw blade

• The exchange of the saw blade can only be under-

taken in rewood cut position.

• Loosen the top and bottom screws on the protec-

tive cover approx. 5 mm and open the protective

cover.

• To lock the saw blade into place, insert the locking

pin (1) through the corresponding opening on the

saw blade guard. To do this, insert the pin com-

pletely and straight into the hole. Use the corre-

sponding hole (depending on the saw blade type)

so that the pin is at the lowest point (bottom of the

tooth).

• Loosen the saw blade with the supplied open-end

spanner / Allen wrench (2).

• Remove the saw blade ange

• Insert the new saw blade.

• Mount the saw blade ange again and tighten the

clamp screw.

• Remove the locking pin.

m Attention! When installing the saw blade, pay

attention to the correct direction of rotation!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Wox D 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 3.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Wox D 700SL Manual

Product: