782582
41
Zoom out
Zoom in
Previous page
1/68
Next page
41
FR
GB
- Release the 3 fixing bolts on the measuring tape (I).
- Adjust the parallel fence on the measuring tape to «0».
- Displace the whole as far as possible towards the saw blade.
- Check the parallel running of fence and saw blade.
- Fix the whole temporarily with the left screw (P).
- Put the parallel fence in line with the right-hand table groove.
- Tighten the 2 other screws of the measuring tape.
7. PUTTING THE MACHINE INTO OPERATION
d. Setting the parallel fence
By releasing the screw under the support (H), the profile of the
parallel fence can be adjusted in length, or it can be reversed
to match work piece height and saw blade angle (30).
(28)(29)
- Desserrer les 3 vis de fixation de la réglette (I).
- Ajuster le guide parallèle sur le «0» de la réglette.
- Déplacer l’ensemble au plus près de la lame de scie.
- Vérifier que le guide soit bien parallèle à la lame de scie.
- Fixer provisoirement ce réglage par la vis de gauche (P).
- Aligner le guide parallèle avec la rainure droite de la table
machine.
- Serrer les 2 autres vis de la réglette.
7. UTILISATION DE LA MACHINE
d. Réglage du guide parallèle
- En dévissant la vis située sous son support (H), le profilé
du guide parralèle peut se régler en longueur ou peut être
réversible en fonction de la hauteur des pièces à scier et de
l’inclinaison de la lame. (30)
(28)(29)
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach TS2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach TS2100 in the language / languages: English, German, French as an attachment in your email.

The manual is 4.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info