Manual Scheppach SB08 Woodster (page 31 of 48) (English, German, French, Italian)

782162

Zoom out

Zoom in

1/48

IMPORTANT NOTES

The electric motor has been designed for the S 1 operat-

ing mode.

In case of an overload of the motor, it turns off automati-

cally. After a cooling period (duration varies), you can

turn on the motor again.

DEFECTIVE ELECTRIC CONNECTION LINES

Often, insulation damages occur on electrical connection

lines.

Causes are:

• Drag marks if connection lines are led through window

or door clearances.

• Kinks due to improper attachment or routing of the

connection line.

• Cuts caused by running over the connection line.

• Insulation damages caused by pulling the connection

line out of the wall socket.

• Fissures caused by the ageing of the insulation.

Such defective electric connection lines must not be used

and are hazardous due to the insulation damages. Regu-

larly check the electrical connection lines for damages.

Please make sure that the connection lines are discon-

nected from the mains supply during the check.

Electrical connection lines must comply with the relevant

VDE and DIN regulations. Only use connection lines la-

belled with H 07 RN. The labelling of the connection ca-

ble with the type speciﬁcation is required.

AC MOTOR

• The supply voltage must be 230 V / 50 Hz.

• Extension lines up to a length of 25 m must have

a cross section of 1.5 square millimetres. Extension

lines with a length of more than 25 m must have a

minimum cross section of 2.5 square millimetres. for

wood and synthetic materials:

• The mains connection is protected with a delayaction

fuse of 16 A.

If you have further questions, please specify the follow-

ing:

• Motor manufacturer

• Kind of current of the motor

• Data from the machine type plate

• Data from the switch type plate

If you return the motor, always return the complete drive

unit with the switch. Perform resetting, measuring, and

cleaning work exclusively when the motor is turned off.

Maintenance

Disconnect the mains plug, and wait until the rotating

tool stands still. All protection and safety devices must

be immediately re-installed once the repair and mainte-

nance work is completed. The built-in ball bearings are

maintenance-free.

REMARQUES IMPORTANTES

Le moteur électrique est conçu pour un mode d’exploita-

tion S 1/40 %.

En cas de surcharge du moteur, celui-ci s’arrête auto-

matiquement. Après un temps de refroidissement (d’une

durée variable), il est possible de remettre le moteur en

marche.

CÂBLES DE BRANCHEMENT

ÉLECTRIQUE DÉFECTUEUX

Il arrive fréquemment que l’isolation des câbles de bran-

chement électrique présente des avaries. Les causes en

sont:

• Écrasements, si le câble passe sous la porte ou la

fenêtre.

• Coudes dûs à une mauvaise ﬁxation ou un mauvais

guidage du câble de branchement.

• Coupures dues à un écrasement du câble.

• Extractions violentes du câble de la prise murale.

• Fissures dues au vieillissement de l’isolation.

Il est déconseillé d’utiliser des câbles électriques qui pré-

sentent ces types d’avaries. Danger de mort. Vériﬁer régu-

lièrement les câbles de branchement électrique. Veiller à

ce que le câble n’entre pas en contact avec la tension de

secteur pendant la vériﬁcation.

Les câbles de branchement électrique doivent correspon-

dre à la réglementation en vigueur dans votre pays.

MOTEUR MONOPHASÉ

• La tension du secteur doit correspondre aux indica-

tions portées sur la plaque signalétique du moteur.

• Les câbles de rallonge d’une longueur maximale de 25

m doivent présenter une section transversale de 1,5

mm2, ceux d’une longueur supérieure à 25 m doivent

présenter une section transversale de 2,5 mm2 .

• Le branchement au réseau est équipé d’un fusible à

action retardée de 16 A. En cas de questions supplé-

mentaires, veuillez fournir les indications suivantes:

• Fabricant du moteur Nature du courant du moteur Don-

nées se trouvant sur la plaque signalétique de la ma-

chine Données se trouvant sur la plaque signalétique

du conjoncteur En cas de renvoi du moteur, toujours

envoyer l’unité moteur complète avec le conjoncteur.

Maintenance

Effectuer les opérations d’équipement, de réglage, de

mesure, et de nettoyage, seulement quand le moteur est

coupé. Débrancher la prise et attendre la mise au repos

de l’outil rotatif. Une fois les travaux de réparation et de

maintenance achevés, tous les dispositifs de protection

et de sécurité doivent être remontés immédiatement. Les

roulements à billes étant intégrés sont libres d’entretien.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SB08 Woodster in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SB08 Woodster Manual

Product: