Manual Scheppach KS55PS Kity (page 23 of 72) (English, German, French, Italian, Portuguese, Spanish)

782280

Zoom out

Zoom in

1/72

23GB

14. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types of

material, such as metal and plastic. Defective compo-

nents must be disposed of as special waste. Ask your

dealer or your local council.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and

electronic equipment (WEEE). This product must be

disposed of at a designated collection point. This can

occur, for example, by handing it in at an authorised

collecting point for the recycling of waste electrical

and electronic equipment. Improper handling of

waste equipment may have negative consequences

for the environment and human health due to poten-

tially hazardous substances that are often contained

in electrical and electronic equipment. By properly

disposing of this product, you are also contributing

to the effective use of natural resources. You can

obtain information on collection points for waste

equipment from your municipal administration, pub-

lic waste disposal authority, an authorised body for

the disposal of waste electrical and electronic equip-

ment or your waste disposal company.

15. Trouble shooting

Problem Possible Cause Help

The motor does not

run.

Faulty motor, power supply cable or plug.

Burned out fuses.

Have the machine checked by skilled

personnel. Do not try to repair the machine

yourselves as it may be dangerous. Check

the fuses and replace them if necessary.

The motor starts

slowly and does not

reach running speed.

Low power supply voltage. Damaged wind-

ings. Burned out capacitor.

Ask for the Electricity Board to check the

voltage available. Have the machine motor

checked by skilled personnel. Have the

capacitor replaced by skilled personnel.

Excessive motor

noise.

Damaged windings. Faulty motor. Have the motor checked by skilled person-

nel.

The motor does not

reach full power.

Overloaded circuit due to lighting, utilities or

other motors.

Do not use other utilities or motors on the

circuit to which the plunge cut saw is con-

nected.

Motor overheats easily Overload of the motor; inadequate cooling

of the motor

Prevent overloading the motor when cutting;

remove dust from the motor to ensure an

optimum cooling of the motor

Decrease in cutting

power when sawing

The saw blade is too small (sharpened too

often)

Re-adjust the end stop of the saw unit

The saw cut is rough

or wavy

The saw blade is dull; the tooth shape is not

suited to the thickness of the material

Re-sharpen the saw blade or use an ap-

propriate saw blade

The work piece rips or

splinters

The cutting pressure is excessive or the

saw blade is not suited to the application

Use the correct saw blade

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KS55PS Kity in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KS55PS Kity Manual

Product: