Manual Scheppach KS55PS Kity (page 24 of 72) (English, German, French, Italian, Portuguese, Spanish)

782280

Zoom out

Zoom in

1/72

24 GB

The edge of the splinter guard now corresponds

exactly to the cutting edge of the saw blade

Caution!

Always secure the workpiece in such a way that

it cannot shift.

Always move the machine forward; never pull it

toward the body.

TO SAW:

1. Set the saw on the guide rail.

2. Switch on the machine.

3. Press the saw slowly down to the set cut depth

and move this evenly forward along the rail.

PLUNGE CUTS:

To Saw:

1. Set the saw on the guide rail at the marked cut-

ting point

2. Secure the rebound protection or fence (acces-

sory not included) at the back and front cut points

on the guide rail.

3. Switch on the machine.

4. Press the saw down slowly to the set cut depth

and move this forward evenly on the rail up to the

front cutting point.

Tilt Protection

Put the rail saws with a the supplied anti-tilt. This pre-

vents the machine from tilting sideways when tilting.

This physical injuries or damage to the machine can

be avoided.

Use of the dust bag (Fig. 12)

Push the dust bag (21) onto the extraction nozzle

(12).

16. Accessories

This manual may contain descriptions of acces-

sories that are not included in the scope of sup-

ply of your machine!

Guide System

2 Pieces guide rails (A) á 700mm

1 Piece rail joiner (F)

1 Piece tilt protection

2 x professional screw clamps (B)

1 x dust bag (21)

1 x non-return mechanism (D)

Guide Device (Fig. 10, 11)

The guide rails (A) enable clean, precise cuts and pro-

tect the surfaces from damage.

When sawing with the guide rail, the cut depth is 4.5

mm less than the scale value on the machine.

For safety, the guide rail can be secured with screw

clamps (B) (not included).

The tilt protection prevents the plunge saw from tilting

during miter cuts and adjustment work.

The rebound protection (D) ensures a safe guiding

during plunging into the workpiece (not included).

By means of the rail joiner (F), 2 guide rails can be

connected and allow long, precise cuts

The guide clearance of the assembly on the guide rail

can be regulated with the two adjustment screws (E).

With the offered accessories, miter cuts, corner cuts

and other tting tasks can be carried out.

When rst using this saw on the optional guide rail,

it will need to be adjusted to slide with minimal side

movement on the guide rail, Adjustable cams (Fig 10

“E”) are tted to do this.

1. Place saw on guide rail.

2. Turn cams (Fig 10 “E”) anti-clockwise until tight.

Then clockwise slightly to allow clearance. While

holding dials in position lock in place by screwing

down the Socket head Cap screws in the middle

of each Cam (5mm allen key supplied with ma-

chine)

3. Pull saw back and forth along rail ensuring it

slides smoothly Re-adjust as needed.

4. Future adjustment may be needed depending on

use of saw.

Splinter Protection (guide rails)

The guide rail comes with a splinter guard, which

must be tted before the rst use.

1. Secure rail with the screw clamps to a piece of

scrap lumber.

2. Adjust the guide clearance on the rail with the two

adjustment screws (E).

3. Set the plunge saw to ca. 6mm cut depth

4. Set up the saw at the back end of the rail.

5. Switch on the machine, press down to the set cut

depth and t the splinter guard along the whole

length in one pass without stopping.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KS55PS Kity in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KS55PS Kity Manual

Product: