Manual Scheppach HSM3500 (page 32 of 92) (English, German, French, Spanish)

781910

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

32 | GB

17. Additional instructions for

leakage current circuit-breaker

(Fig 25)

Please observe the following important instructions

on start-up and handling.

Pay attention to the instructions even if you hand

over the product to a third party. Preserve this oper-

ating Instructions manual for subsequent reference.

Safety instructions!

• Arbitrary alteration and/or modication of the prod-

uct is not allowed for safety- and approval reasons

(CE). Never dismantle the product.

• The product is not suitable for handling by chil-

dren. Children cannot assess the risks involved in

handling electrical devices. Therefore, pay special

attention to the presence of children.

• The structure of the product corresponds to Pro-

tection Class 1. Only a proper mains socket with

an earth wire (230V~/50Hz) of the public power

supply should be used.

• In industrial equipment, the Accident Prevention

Specications of the Federation of Trade Associ-

ations for Electrical Systems and Resources must

be observed.

• In schools, training centres, hobby- and self-help

workshops, the operation of the product must be

monitored responsibly by trained staff.

• Handle the product carefully. Impacts, hits and

drops from even low heights can damage the ma-

chine.

• Never use the product if it is brought from a cold to

a hot room. Under certain circumstances, the re-

sulting condensed water can destroy the product.

• Let the product come to the room temperature,

before connecting it to the mains power supply.

Under certain circumstances, this can take sev-

eral hours.

• Do not hold the product with moist or wet hands.

• Ensure that the Insulation of the entire product is

neither damaged nor destroyed.

• If the product is not operated over long periods,

disconnect it from the mains power supply, pull the

plug out of the socket.

• Avoid the following environmental conditions at the

installation site or during transport:

• Wetness or very high humidity. Extreme cold. Dust

or combustible gases, vapours or solvents. Strong

vibrations.

• Strong magnetic elds as in the vicinity of ma-

chines or loudspeakers.

Start-up of the leakage current circuit-breaker:

• The leakage current circuit-breaker is equipped

with a test button.

• The function should be checked before each start-

up and at regular Intervals (min. once every week).

• Kinks due to improper mounting or routing of con-

necting cables.

• Intersections due to overruns of connecting ca-

bles.

• Insulation damage due to pulling out from wall

sockets.

• Cracks due to ageing of insulation.

Such damaged electric connecting cables should not

be used and can be fatal because of the insulation

damage

AC motor 230 V/ 50 Hz

Mains voltage 230 Volt / 50 Hz.

Mains connection and extension cable must have

3-wires = P + N + SL. - (1/N/PE).

Extension cables must have a minimum cross-sec-

tion of 1.5 mm².

The mains connection is secured with a max. 16A

fuse.

16. Maintenance

Caution! Pull out power plug.

• Clean the machine after each work cycle.

• Replace worn out cutting discs.

• Replace damaged protection device

• Dust and pollution must be removed regularly from

the machine. The best way to clean the machine

is with a piece of cloth or brush.

• All moveable parts must be re-lubricated at peri-

odic intervals.

• Do not use any corrosive substances to clean the

plastic.

• The tub (8) and coolant pump (18) must be cleaned

regularly to remove dirt, as otherwise the cooling

of the diamond cutting disc (14) is not guaranteed.

• Re-commission and inspect all safety equipment.

• Maintenance and repair tasks may only be per-

formed by qualied personnel.

Spare-part ordering

Please quote the following in your order for spare

parts:

• Type of device

• Article No. of device

• Ident. No. of device

• Spare Part No. of the required spare part

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: Diamond cutting wheels, carbon brush,

table & cutting head guides

* Not necessarily included in the scope of delivery!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HSM3500 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HSM3500 Manual

Product: