781910
34
Zoom out
Zoom in
Previous page
1/92
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
34 | GB
19. Trouble shooting
Fault Possible cause Remedy
Diamond cutting disc comes
off when motor is deactivated.
Fastening nut not tightened properly Tighten fastening nu
when motor is deactivated. Failure of mains circuit-breaker Check mains circuit-breaker
Extension cable defective Replace extension cable
Connection with motor or switch is
not OK
Have it checked by an electrician
Motor or switch Is defective Have it checked by an electrician
Motor has no output Cross-section of the extension cable
Is not sufcient
See electrical connection, the fuse has blown
Overloading Check tool
The diamond cutting wheel is dull Replace the diamond cutting wheel with a
new one
The motor switches off during
work
The motor switches off due to over-
loading, e.g. from excessive cutting
depth.
Wait until the motor has cooled down (5-10
minutes), then switch it on again.
The pump shuts off The pump switches off due to over-
loading, e.g. due to heavy contami-
nation.
Immediately shut down the machine. Clean
the pump and restart the machine after ap-
prox. 5-10 minutes. Attention! Never perform
dry cuts!
The cutting process is not
optimal
The cutting wheel is too heavily
stressed
Use a suitable cutting wheel, reduce cutting
pressure
Diamond segments are too dull Sharpen the cutting wheel
The cutting wheel has overheated
due to insufcient cooling water.
Optimise the cooling water supply
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HSM3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HSM3500 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 6.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info