699548
44
Zoom out
Zoom in
Previous page
1/52
Next page
42 MICRA SATEL
can be changed by sending an SMS message in the “current message content=new
message content” form.
It should be remembered that the current message content must be entered exactly in
the same way as it was written in the program.
If the message is to be sent from the phone whose number is programmed in the “Telephone
numbers for messaging and test transmissions” list, “GSM telephone, Monitoring stations”
tab, select the “SMS control only from list of telephone numbers for messaging” option,
“Options, zones, outputs” tab.
If the message is to be sent from any phone number, the “SMS control only from list of
telephone numbers for messaging” option, “Options, zones, outputs” tab, must be disabled.
The message can be sent at any moment.
5. I
NITIATING THE MODULE FIRMWARE UPDATE BY MEANS OF
SMS
MESSAGES
Send an SMS message containing the control command to initiate the process of module
firmware update (“SMS initiating update”, “Firmware update” tab)
to the
module telephone
number. The module will connect to the firmware update server, whose address is
programmed in the module.
If the “Server address in SMS” option is enabled in the module (“Firmware update” tab), you
can send a message with the xxxx=yyyy:zz= content, where “xxxx” is the control command,
programmed in the module, which starts the update process, “yyyy” is the address of server
with current firmware for the module (IP address or name), and “zz” is the server port
number. The module will connect to the computer whose address is given in the SMS
message. If the control command in the SMS message is correct, and the other data are
wrong, the address and port of the server to which the module is to connect will be
downloaded from the settings programmed in the module.
After completion of the update, an SMS message with information on the result of update
process and module firmware version will be sent to the telephone number from which the
SMS message initiating the firmware update process was sent.
6. MICRA
CONTROL
APPLICATION
MICRA CONTROL is the software used for remote operation of the MICRA alarm modules
(version 2.05 and later) by means of devices running the Android operating system (version
2.0 and later). The application allows you to arm/disarm the system, clear alarms, control
outputs, as well as bypass/unbypass zones. It also enables the MICRA system status to be
monitored. Communication between the MICRA CONTROL application and the MICRA
module is effected by means of SMS messages. The application can be downloaded free of
charge from the Google Play store.
When using the application, remember that all commands are transferred to the
MICRA module in the form of SMS messages. In reply to each received command, the
module sends an SMS message with information on the current status of the system.
Therefore, remote operation of the system involves financial costs.
For the application to function properly, the “Confirm controlling with status SMS”
option (see p. 22) must be enabled in the module.
If no answer is received within 1 minute of sending the SMS message to the module,
the application will inform the user that there is no answer from the module.
44


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info