699548
45
Zoom out
Zoom in
Previous page
1/52
Next page
SATEL MICRA 43
If the “SMS control only from list of telephone numbers for messaging” option (see
p. 22) is enabled in the module, the telephone number of the device with MICRA
CONTROL application must be on the “Telephone numbers for messaging and test
transmissions” list (see p. 26).
The appearance of the application and its way of operation depend on the version of
Android operating system.
If the GPRS reporting is active, the module response to commands may be delayed.
If the given function is not available (e.g. bypassing zones is impossible, when
the system is armed), the user will be informed about it by a suitable message.
6.1 FIRST LAUNCH OF THE APPLICATION
1. After launching the application, the system selection screen will be displayed. Bring up the
menu, using the function button of the device with MICRA CONTROL installed, and then
touch the “New” command.
2. In the menu that will be displayed, touch the “Name” command.
3. In the window that will open, enter the name of MICRA system to be operated by means
of the application. Touch the “OK” button. The window will close.
4. Touch the “Telephone number” command in the menu.
5. In the window that will open, enter the telephone number of MICRA module. Touch the
“OK” button. The window will close.
6. Touch the “Save” button. The programmed MICRA system will be displayed in the list.
If necessary, repeat the steps 1-6 to add next MICRA systems.
7. Touch one of the displayed MICRA systems. An SMS message will be sent to the MICRA
module. In reply, the module will send back, in the form of several SMS messages, the
configuration data required for remote control of the MICRA system using the application.
8. After the SMS messages with configuration data are received, the main screen for MICRA
system control will be displayed.
The downloaded configuration data are written to the memory of the device running
the MICRA CONTROL application.
9. Touch the button to get information on the current status of the system. An SMS
message will be sent to the MICRA module. In response, the module will send back
information on the system status in the form of SMS message.
10. You can proceed to control of the MICRA system.
6.2 SYSTEM SELECTION SCREEN
The first screen, which is displayed after starting the application, allows you to program basic
parameters of the MICRA system, which is to be operated by means of the application (see
section “First launch of the application”). You can program parameters of a few different
MICRA systems. After they have been programmed, a list of MICRA systems that can be
controlled will be available.
Touch one of the displayed MICRA systems to go to the main control screen of that system
(if this is the first touch, SMS messages will be exchanged to download the configuration
data).
45


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info