699548

Satel MICRA Manual

43
Zoom out
Zoom in
Previous page
1/52
Next page
SATEL MICRA 41
5. When the SIA-IP format is selected:
– define the account number to be used to identify the control panel for the reporting
purposes (“SIA-IP account no.” field);
– define the time interval at which an additional test transmission is to be sent (“Test
transm. every” field).
6. Indicate the monitoring station to which the event code is to be sent (the event may be
sent to both stations) and define the Contact ID codes for events to be reported. It should
be done in the “Reporting” tab, the “Keyfobs” tab (“Reporting” tab) and in the “MKP-300
keypad” tab, “Messaging / reporting” table. In the alarm module mode, with the “Set CID
codes automatically” option enabled, the codes are assigned automatically.
4.7 STARTING SMS REPORTING
1. Enter the telephone number of Short Message Service Center in “SMS center number”
field in the “GSM telephone, Monitoring stations” tab”, unless it has been saved by the
operator to the SIM card memory.
2. Configure parameters of the monitoring station(s) (“GSM telephone, Monitoring stations”
tab):
– select the “SMS” field;
– enter the GSM telephone number through which the monitoring station receives SMS
messages (“Tel. number (SMS)” field).
3. Define the SMS message format in which the received event codes will be sent to the
monitoring station (“GSM telephone, Monitoring stations” tab).
4. Indicate the monitoring station to which the event code is to be sent (the event may be
sent to both monitoring stations) and define the Contact ID codes or two-character codes
for events to be reported. It should be done in the “Reporting” tab and the “Keyfobs” tab
(“Reporting” tab) and in the “MKP-300 keypad” tab, “Messaging / reporting” table. In the
alarm module mode, with the “Set CID codes automatically” option enabled, the codes are
assigned automatically.
4.8 STARTING CLIP / SMS MESSAGING
The SMS or CLIP messaging is conducted irrespective of the monitoring.
1. Enter the telephone number of Short Message Service Center in “SMS center number”
field in the “GSM telephone, Monitoring stations” tab”, unless it has been saved by the
operator to the SIM card memory.
2. Enter the telephone numbers which are to be notified by the module, using the SMS
messages or CLIP service (“Telephone numbers for messaging and test transmissions”
table in the “GSM telephone, Monitoring stations” tab).
3. Define about which events and in what form (CLIP or SMS) the predefined telephone
numbers are to be notified. In case of SMS messaging, it is necessary to define the
content of SMS message. It should be done in the “CLIP / SMS messaging” tab and the
“Keyfobs” tab (“CLIP / SMS messaging” tab) and in the “MKP-300 keypad” tab,
“Messaging / reporting” table. For events related to the analog zones, you can additionally
enable the “Add input voltage value to message” option.
4.9 CHANGING THE TEXT MESSAGES BY USING SMS
The content of SMS message defined:
– in the “Violation / pass” and “Restore” fields, “CLIP/SMS messaging” tab,
– in the “SMS” field, “Keyfobs” tab,
– in the “SMS” field, “MKP-300 keypad” tab,
… 43 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info