699548

Satel MICRA Manual

42
Zoom out
Zoom in
Previous page
1/52
Next page
40 MICRA SATEL
The module is case-sensitive, hence the content of SMS messages for programming
the module settings should be entered in upper-case letters.
4.5 CONFIGURING THE MODULE TO WORK IN ALARM DEVICE MODE
1. Click the “Options, zones, outputs” tab and then:
– enable the “Alarm device” option;
– define the wired zone parameters (wiring type, sensitivity, restore and zone type),
register and configure the wireless detectors (zone type, presence check option);
– if delayed zones are used, define the entry delay time;
– if the exit delay countdown is to run, allowing you to leave the premises without
triggering alarm, define the suitable parameter;
– define the output parameters (output type, cut-off time);
– if the module users are to be authorized to remotely control the system by means of
SMS messages (arming/disarming, clearing alarms, bypassing/unbypassing zones,
controlling outputs), define the suitable control commands.
2. If the module is to be operated by means of keyfobs, click on the “Keyfobs” tab and add
the keyfobs (see: description of adding keyfobs, p. 34-34).
3. If the module is to be operated by means of the MKP-300 keypad, click on the “MKP-300
keypad” tab, register the device (see: Adding new wireless devices) and program it
accordingly (see: “MKP-300 keypad” tab).
4. Click on the “Reporting” tab and then enable the “Set CID codes automatically” option.
The codes will be automatically matched to corresponding events (see: description of the
“Set CID codes automatically” option, p. 32). Enabling the option is recommended not
only when event codes are to be sent to the monitoring station. The codes and their
descriptions are written to the event log, thus facilitating diagnostics.
5. If the module is to execute the reporting or messaging functions, configure suitable
parameters and options, as recommended in sections “Starting GPRS reporting”,
“Starting SMS reporting” and “Starting CLIP / SMS messaging”.
4.6 STARTING GPRS REPORTING
1. Enter the GPRS communication parameters (“GSM telephone, Monitoring stations” tab):
– Access Point Name (APN) for Internet GPRS connection;
– user name for Internet GPRS connection;
– password for Internet GPRS connection;
– DNS server IP address which is to be used by the module (the DNS server address
requires no programming, if the IP address is entered for the monitoring station).
2. Configure parameters of the monitoring station(s) (“GSM telephone, Monitoring stations”
tab):
– select the “GPRS” option;
– enter the monitoring station address (“Address (GPRS)” field);
– enter the number of TCP port through which communication with the monitoring station
will be effected;
– for the SATEL IP format, enter the encryption key for data to be sent to the monitoring
station (“Station key”);
– for the SATEL IP format, enter the GPRS key.
3. Define the protocol to be used by the module for sending event codes to the monitoring
station (“TCP/IP” or “UDP”).
4. Define the format to be used by the module for sending event codes to the monitoring
station (“SATEL IP” or “SIA-IP”).
… 42 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info