699548
32
Zoom out
Zoom in
Previous page
1/52
Next page
30 MICRA SATEL
b – zone blocked,
A – alarm,
a – alarm memory,
T – zone tamper,
B – low battery in the wireless detector,
C – no communication with the wireless detector.
information on the status of module working in the alarm device mode:
ARM – armed,
DISARM – disarmed.
AC – information on the module voltage status:
i – AC voltage OK,
I – AC voltage loss.
AK – information on the battery status:
i – battery OK,
I – low battery.
OUT 1 ÷ OUT2 – information on relay outputs status OUT 1 ÷ OUT2:
o – output inactive,
O – output active.
– EVb – the maximum number of transmissions has been reached (see: “Limit number of
notifications to” parameter, “GSM telephone, Monitoring stations” tab).
Reaction to CLIP / Listen-in initiation only when number is on list of telephones for
messaging – if this option is enabled, the module will only send test transmission or SMS
message with status information, or will initiate listen-in, when the telephone number,
identified owing to the CLIP service, is one of the numbers programmed in the “GSM
telephone, Monitoring stations" tab on the “Telephone numbers for messaging and test
transmissions” list.
If the “Reaction to CLIP / Listen-in initiation only when number is on list of telephones
for messaging” option is not enabled, the test transmissions and SMS messages with
information on device status:
for the numbers in the list, they will be sent by the module immediately,
for the numbers not in the list, they can be sent by the m
odule every 10 minutes at
the most.
Listen-in
Rings to answer – enter in this field the number of rings after which the module will answer
the call and turn on the microphone. You can program values from 0 to 9. If value 0 is
programmed, the listen-in feature is disabled.
Micr. Sens. – microphone sensitivity can be programmed within the range from 0 to 15.
4.3.5 “CLIP / SMS MESSAGING TAB
Notification can be effected by means of SMS messages or by using the CLIP service (when
the CLIP service is used, the module does not inform about zone restore / end of trouble).
For the analog inputs, the messaging parameters are to be defined separately for each
of the defined thresholds.
CLIP T1 – T4 – select the fields of telephones (see: numbers in the list "Telephone numbers
for messaging and test transmissions", programmed in the “GSM telephone, Monitoring
stations” tab), which will be informed about a change in the given zone status or
occurrence of the particular trouble by using the CLIP service.
32


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info