699548
31
Zoom out
Zoom in
Previous page
1/52
Next page
SATEL MICRA 29
CLIP settings
The table makes it possible to determine in detail how the CLIP test transmissions are to be
sent to the four telephone numbers programmed in the “GSM telephone, Monitoring stations”
tab. Click twice on the chosen field to select/deselect it (the field is selected, if “x” symbol is
displayed in it).
Acknowledgement – select this field if the module is to wait for the acknowledgement of
receipt of test transmission using the CLIP service. In order to acknowledge receiving the
CLIP test transmission, reject the call coming from the module.
Retries number – if the “Acknowledgement” field is selected, the test transmission with the
use of CLIP service can be conducted a specified number of times. Values from 1 to 15
can be programmed. Acknowledgement of the CLIP test transmission receipt will make the
module stop repeating such a transmission (e.g. if the test transmission is programmed to
be repeated 5 times, but it is already received at the first attempt, the module will not send
the other 4 transmissions).
-> SMS – if the “Acknowledgement” field is selected and receiving the CLIP test transmission
is not acknowledged, the module may send a “CLIP failed” SMS message to the selected
telephone number.
CLIP
CLIP starts test transmission – if this option is enabled, it is possible to send a test
transmission with the use of CLIP service. Call the module telephone number and after
hearing the dialing tone, hang up – the module will identify the telephone number of the
calling party and send a test transmission according to the preprogrammed settings.
Send SMS with module status to CLIP – if this option is enabled, it is possible to obtain
information about the module status with the use of CLIP service. Call the module
telephone number and after hearing the dialing tone, hang up – the module will identify the
telephone number of the calling party and send to that number an SMS message
containing the following information:
– module name;
version of module software (version number and date of build);
S0 ÷ S4 – current level of signal received by the antenna;
P – current supply voltage value.
Z1 ÷ Z4 – information on the status of Z1 ÷ Z4 zones:
i – digital / analog zone normal status,
I – digital zone violated,
L – voltage at analog zone has dropped below threshold L; information on voltage
value,
H – voltage at analog zone has exceeded threshold H; information on voltage value,
b – digital / analog zone blocked,
A – alarm,
a – alarm memory.
TMP – information on status of TMP zone:
i – zone normal status,
I – zone violated,
b – zone blocked,
A – alarm,
a – alarm memory.
Z6 ÷ Z13 – information on the status of Z6 ÷ Z13 zones:
i – zone normal status,
I – zone violated,
31


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info