699548

Satel MICRA Manual

30
Zoom out
Zoom in
Previous page
1/52
Next page
28 MICRA SATEL
information on the module status will be sent – as test transmissions – to the selected
telephone numbers (see: “Send SMS with module status to CLIP” option).
Write event for reporting – if this option is enabled, each test transmission will be written to
the event log. After enabling the option, you can send test transmissions to the monitoring
stations. The method of sending the event code (SMS, GPRS) depends on the rules
defined for each monitoring station in the “GSM telephone, Monitoring stations” tab. It is
necessary to define the event code to be sent.
Event codes for module test transmission
The table makes it possible to define the Contact ID codes which will be sent to the
monitoring stations for the module test transmission (the code will also be written to the
event log).
Format – the field displays information that the code is sent in the Contact ID format.
CODE – program 3 digits of the event code in this field. You can also make use of the
code editor. To open the code editor window, click on the button available in the
“EVENT” field.
R – select this field, if the event code is to denote new restore/arming (click on the field
twice to select/deselect it).
Part. – enter in this field the partition number which will be included in the event message
sent to the monitoring station.
Z. No. – enter in this field the zone number which will be included in the event message
sent to the monitoring station.
EVENT – the field displays description of the event whose code is entered in the “CODE”
field. A button , which opens the editor of Contact ID codes, is also available in the
“EVENT” field.
The test transmission will be sent as an event, if the following parameters and options
are programmed for the monitoring station:
GPRS reporting (see section “Starting GPRS reporting”) or SMS reporting (see
section “Starting SMS reporting”) is activated,
object identifier different from “0000” is programmed,
reporting format is programmed,
event code different from “000” is programmed.
Test transmissions to be sent to telephone numbers
The table allows you to define the form in which the test transmissions will be sent to the
telephone numbers programmed in the “GSM telephone, Monitoring stations” tab. Click
twice on the chosen field to select/deselect it (the field is selected if the “x” symbol is
displayed in it).
SMS – select this field, if the module test transmission is to be sent to the selected
telephone number in the form of SMS message.
CLIP – select this field, if the module test transmission for the selected telephone number
is to be realized with the use of CLIP service (the module will dial the programmed
number and then will be trying for 30 seconds to get through – the module telephone
number will be displayed in the telephone).
Do not answer any call from the module, if the CLIP test transmission is to be
effected without incurring any costs.
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info