Set CID codes automatically – option available for the alarm device mode. If the option is
enabled, the program will automatically select Contact ID codes for:
Set CID codes automatically – option available for the alarm device mode. If the option is
enabled, the program will automatically select Contact ID codes for:
– events from the zones of 0. I
NSTANT
, 1. 24
H
, 2. A
RM
/D
ISARM
(
SWITCH
), 3. A
RM
/D
ISARM
(
BUTTON
) and 4. D
ELAY
type;
– events from the zones of 0. I
NSTANT
, 1. 24
H
, 2. A
RM
/D
ISARM
(
SWITCH
), 3. A
RM
/D
ISARM
(
BUTTON
) and 4. D
ELAY
type;
– troubles, module related events (settings restart, clock programming) and SMS control; – troubles, module related events (settings restart, clock programming) and SMS control;
– arming/disarming, alarm clearing and panic alarm triggering by using a keyfob (the
codes of these events can be programmed in the “Keyfobs” tab).
– arming/disarming, alarm clearing and panic alarm triggering by using a keyfob (the
codes of these events can be programmed in the “Keyfobs” tab).
With the “Set CID codes automatically” option enabled, entering the event codes With the “Set CID codes automatically” option enabled, entering the event codes
manually will be unavailable.
Reporting parameters
Fig. 14. “Reporting” tab for the alarm device mode.
For the analog inputs, the reporting related parameters are to be determined
separately for each of the defined thresholds.
S1 – select this field if the event code is to be sent to the monitoring station 1.
S2 – select this field if the event code is to be sent to the monitoring station 2.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Satel MICRA at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.
The manual is 0,9 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
