699391
8
Zoom out
Zoom in
Previous page
1/40
Next page
6 INT-TSI SATEL
remember that CKM (clock) and DTM (data) signals must not be sent through one
twisted-pair cable. The wires must be run in one cable. The length of cables must not
exceed 300 m.
Fig. 4. Connection of the keypad to the control panel.
9. Connect the wires to the terminals of additional zones, if any detectors are to be
connected to them (the detectors are to be connected in the same way as to the control
panel onboard zones).
10. Connect the power supply wires to the keypad (terminals +12V and COM). The keypad
can be powered from the control panel mainboard, an expander with power supply or
from an additional power supply unit. The table below shows requirements regarding the
power wires (+12V and COM), if conductors with 0.5 mm diameter are used.
Distance from control panel
Number of parallel connected wires
up to 25 m 1
25 50 m 2
50 75 m 3
75 100 m
4
In the case of INTEGRA 24, INTEGRA 32 and INTEGRA 128-WRL control panels, the
+KPD output cannot be used to power the INT-TSI keypad. You should use the OUT1
or OUT2 high-current output, programmed as type 41. POWER SUPPLY.
A function is available in the keypad which makes it possible to check if the keypad
power supply is appropriate (see the INT-TSI keypad user manual).
11. If the keypad is to be connected to the Ethernet network (image from the network
cameras is to be displayed or the SLAVE keypad is to be used), connect the cable
terminated with RJ-45 plug to the dedicated socket. Use the cable compliant with the
100Base-TX standard (the same as used for connecting computer to the network). It is
advisable to use the flat network cable, which is more flexible, and secure the cable using
a cable tie (see Fig. 5).
12. Place the front panel onto the catches, snap close the enclosure.
After the first start-up of the keypad, downloading of the alarm system data from the
control panel will begin. It may last up to 20 minutes and make using the keypad
somewhat difficult during that time.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info