699391
6
Zoom out
Zoom in
Previous page
1/40
Next page
4 INT-TSI SATEL
the keypad configuration data are stored;
new keypad firmware version is placed;
the events downloaded from the control panel are saved;
the photos which will be used for the slide show can be placed.
The keypad supports the microSD and microSDHC memory cards.
To insert or remove the memory card you must open the keypad enclosure, therefore,
if the alarm system works, remember to enter the service mode.
If the microSD card is removed from the working keypad, you will only be able to
operate the alarm system by using the terminal.
After you insert the microSD card into the working keypad, a window will be displayed
in which you should tap to restart the keypad.
4.1.1 Inserting the microSD card
1. Open the keypad enclosure (see: Fig. 2).
2. Insert the card into its slot and push until it clicks into place. The card contacts should be
directed toward the display.
3. Close the keypad enclosure.
4.1.2 Removing the microSD card
1. Open the keypad enclosure (see: Fig. 2).
2. Push the card to release it.
3. Remove the card from its slot.
5. Operating modes
The keypad can work in one of the following modes:
MASTER default mode the keypad is to be connected to the keypad bus of the control
panel. Additionally, it should be connected to the Ethernet network, if an additional keypad
working in SLAVE mode is to be used.
SLAVE the keypad is to be connected to the Ethernet network. Communication with the
control panel will take place by means of the keypad working in MASTER mode. The
keypad working in SLAVE mode cannot handle the zones.
There can be one additional keypad working in SLAVE mode to each keypad working in the
MASTER mode. Settings and user interface in both keypads may be different.
6. Installation of the keypad working in MASTER mode
6.1 Installation and hook-up
Disconnect power before making any electrical connections.
The device is designed to be used only in the local area networks (LAN). It must
not be connected directly to the public computer network (MAN, WAN).
Connection to the public network may only be done through a router or xDSL
modem.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info