699391
40
Zoom out
Zoom in
Previous page
1/40
Next page
38 INT-TSI SATEL
10. Slide show
If a slide show is to be presented as the screen saver (see the INT-TSI keypad user manual),
the pictures to be displayed must be located on the microSD card. These pictures must be
placed in the Picturesfolder. It is recommended that their size be suitable for the display
resolution, i.e. 800 x 480 pixels. The BMP, GIF, JPG and PNG image formats are supported.
10.1 Preparing pictures for slide show by means of TSI Builder program
1. Click in turn on WindowGallery. The Gallerywindow will be displayed.
2. Click on the icon. The Create gallerywindow will open.
3. Enter the gallery name and then click on the OKbutton.
4. Click on the icon. A window will open, allowing you to indicate the picture which is
to be imported (you can indicate a JPG or PNG file).
5. Having indicated the picture, click on the OK button. A window will open, allowing you to
adjust the picture to the needs of slide show in the keypad.
6. Having finished the picture editing, click on the OKbutton. A window will be displayed, in
which you should enter the file name.
7. Having entered the name, click on the OKbutton. The picture will be saved to the gallery
and its thumbnail will be displayed.
8. Repeat the steps 4-7 to add further pictures to the gallery.
9. Remove the microSD card from the keypad and insert into the computer memory card
reader.
10. Click on the icon. Thumbnails of the pictures located in the Picturesfolder on the
microSD card will be additionally displayed in the gallery. In the upper left corner of the
thumbnail, the memory card icon will be displayed, its color having the following
meanings:
grey the picture has not been saved to the card;
green the picture has been saved to the card.
11. Click on the thumbnail to save the picture to the card or delete it from the card.
11. Updating the keypad firmware
The TSI Builder program automatically downloads firmware updates for the INT-TSI keypad.
The new firmware version is saved to the memory card during configuration saving
(synchronization). The firmware will be updated after restarting the keypad.
When the enclosure is opened (in order to remove or insert the card), when saving
configuration to the memory card via a network and during updating of the keypad
firmware, the service mode must be active in the control panel.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info