699391
7
Zoom out
Zoom in
Previous page
1/40
Next page
SATEL INT-TSI 5
The INT-TSI keypad is designed for indoor installation. The place of installation should be
readily accessible to the system users.
1. Open the keypad enclosure (see Fig. 2). The enclosure opening tool, shown in the
illustration, is included in the keypad delivery set.
2. Place the enclosure base on the wall and mark the location of mounting holes.
3. Drill the holes for wall plugs (screw anchors).
Fig. 2. Opening the enclosure.
4. Install in the wall a junction box to which cables will be connected and in which a ferrite
ring will be placed.
The purpose of the ferrite ring delivered with the keypad is to decrease the
electromagnetic interference. Make sure that the ferrite ring is positioned as close as
possible to the enclosure.
5. Wrap the cables around the ferrite ring (see: Fig. 3), but no more than 3 turns per cable.
Fig. 3. The cable wrapped around the ferrite ring.
6. Pass the cables through the opening in the enclosure base.
7. Using wall plugs (screw anchors) and screws, fasten the enclosure base to the wall.
8. Connect the DTM, CKM and COM keypad terminals to the appropriate terminals of the
control panel keypad bus (see Fig. 4). It is recommended that the unscreened straight-
through cable be used for making the connection. If you use the twisted-pair type of cable,
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info