699578
21
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 19
In the 0E format (Contact ID selected codes) monitored are all events which have a CID
code and which are assigned, respectively, to the station 1 or 2 in the corresponding
event assignment functions of the control panel, while the events which have no
assignment function (marked in the „Appendix” table as no assignment) are only
monitored when any non-zero monitoring code has been programmed for them.
The telephone line restore and trouble events are always monitored in both Contact ID
formats, while they are not monitored in the other formats.
FS47 - programming monitoring options (BIT)
These options determine the way communication is established with the monitoring
stations and how the event codes are transmitted. The programming consists in lighting up
the LEDs of selected options and confirming the choice with the [#] key.
No. LED Option
1 OFF
2 OFF
transmission to station 1 or station 2 (report is sent to the one station only, to
that, which first answers the call, without event sorting)
1 ON
2 OFF
report to station 1 only, without event sorting
1
OFF
2 ON
report to station 2 only, without event sorting
1
&
2
1
ON
2 ON
transmission to both stations with event sorting (event sorting programmed
with corresponding service functions, separately for each group of events)
ON
reported partition event code extended with user number (access code
number)
5
OFF
automatic extension with user number disabled
ON
reported zone event code extended with zone number (for zone 1 - "1", for
zone 2 - "2" and so on)
6
OFF
extension with the zone number disabled
ON
panel does not send the event code if STATION 1 fails to acknowledge receiving
the information after 16 attempts
7
OFF
the panel skips no codes for STATION 1
ON
the panel skips sending the events code if STATION 2 fails to acknowledge
receiving the information after 16 attempts
8
OFF
the panel skips no codes for STATION 2
Notes:
In case of data formats 4/1 and 3/1, do not enable the options 5 and 6.
The options 5 and 6 are only meaningful when double-character codes are reported. If
this is the case, single-character event codes are programmed (the second character
being 0), and the panel, with the extension option on, will add the zone number or the
user number, respectively, as the second character. The codes programmed as
double-character (both characters different from 0) will be sent in their programmed
form, with no extension. Extension of the event codes by adding the zone / user
number makes it possible to enter identical codes for one type of events for all zones
or partitions, and then to differentiate between them, based on the added zone / user
no. (e.g., it is sufficient to program just one, identical character for all zones from which
the zone alarm code (FS60) is to be sent). This solution has been adopted to facilitate
programming of the event codes.
The options 3 and 4 are not used.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info