699578
17
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 15
ON
zone violation end code will be reported to the monitoring station not immediately but
only after the zone is disarmed (RESTORE AFTER DISARM)
8
OFF
zone violation end code will be reported to the monitoring station immediately (if
option 7 is off)
During programming, the AB, AB LEDs show the zone number for which the options are
being programmed.
Note: By default, the option no. 1 is active for all of the zones, which means that
arming
is impossible, if any of the zones is violated or tampered
.
FS28 - programming individual entry delay (DEC)
Where different entry delay times are required for the particular zones, it is possible to
program individual "entry delay time" (alarm delay). The programming consists in entering
the time for delayed zones from 00 (then the global time specified in FS6 is valid) to 99
seconds. The programmed times refer only to the ENTRY/EXIT, DELAYED, INTERIOR
DELAYED and 24h AUDIBLE zone types. If the entry delay is programmed for other zones
than the delayed ones (e.g., for the INSTANT zones), it will have no effect on the reaction
type of those zones.
EXAMPLE:
programming the entry delay time (alarm delay) for the following zones: zone 4 - delay
30s, zone 7 - delay 45s, zone 8 - delay 60s.
12345] [#] - enter the service mode
[2][8] [#] - call the function
[#] - skip programming entry delay for zone 1
[#] - skip programming entry delay for zone 2
[#] - skip programming entry delay for zone 3
[3][0] [#] - program the entry delay for zone 4
[#] - skip programming entry delay for zone 5
[#] - skip programming entry delay for zone 6
[4][5] [#] - program the entry delay for zone 7
[6][0] [#] - program the entry delay for zone 8
[
*
] - exit the function
Functions programming output parameters
FS31 - programming OUT1 output
The function makes it possible to define three parameters regarding the OUT1 output:
After selecting the function, the LEDs 1 to 8 show the respective parameter setting, while
the LEDs A,B show which parameter is being programmed.
Output function (B diode is blinking) - the programming consists in entering a two-digit
number (identically as in the DEC functions) and confirming it with the [#] key, which is
followed by an automatic jump to next parameter programming. It is possible to program
one of the functions below for each zone, and thus specifying situations when the output
will be activated:
00 - NOT USED
01 - BURGLARY
02 - FIRE/BURGLARY
03 - FIRE
04 - KEYPAD ALARM
05 - FIRE FROM KEYPAD
06 - PANIC FROM KEYPAD
07 - MEDICAL (AUX) FROM KEYPAD
08 - TAMPERING (KEYPAD/MODULE)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info