699578
16
Zoom out
Zoom in
Previous page
1/40
Next page
14 Programming CA-6
06 - COUNTING C 2
07 - COUNTING C 3
08 - 24H AUDIBLE
09 - 24H AUXILIARY
10 - 24H SILENT
11 - 24H FIRE
12 - ARMING
13 - SILENT ARMING
14 - DISARMING
15 - NO ALARM ACTION
16 - ARM/DISARM
17 - DELAYED WITH SIGNALLING
18 - ARMING WITH BYPASS
19 - PERIMETER
FS27 - programming zone options (BIT)
Each control panel zone has eight options which activate additional functions of the zone.
The use of these options depends on the zone type. The control panel performance only
these function, which are relevant to the given zone. For example, it is no use to activate
the "auto-reset 1” (bypassed after first alarm) option or the "priority" option (arming
impossible, if the zone with activated option is violated) for the "arming" type zones.
Activation of such options has no effect.
Activation of the options is carried out individually for each zone and consists in lighting up
the corresponding LEDs.
The LEDs 1 to 8 have been assigned the following options:
No LED Option
ON
PRIORITY (arming impossible, if the zone with activated option is violated or
tampered)
1
OFF
arming possible, even if the zone with activated option is violated or tampered
ON
CHIME (zone generates chime signal when disarmed)
2
OFF
zone does not generate chime signal
ON
zone bypassed after first alarm (AUTO-RESET 1)
3
OFF
always alarms (when both options 3 and 4 are off)
ON
zone bypassed after third alarm (AUTO-RESET 3)
4
OFF
always alarms (when both options 3 and 4 are off)
ON
information on the zone violation will not be reported to the monitoring stations if the
violation occurred during the entry delay (ABORT DELAY)
5
OFF
information on the zone violation during the entry delay will be reported
ON
zone will be bypassed for 120 sec. after power is switched on (which prevents
triggering alarms e.g. when starting the control panel) (POWER UP DELAY)
6
OFF
zone controlled immediately after power-up
ON
zone violation end code will be reported to the monitoring station not immediately but
only after alarming is over (RESTORE AFTER BELL)
7
OFF
zone violation end code will be reported to the monitoring station immediately (if
option 8 is off)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info