699578
28
Zoom out
Zoom in
Previous page
1/36
Next page
26 SATEL Installer Manual
1. enable operation in the transmission format UTI V.21 (CCITT V.21) or BELL 103
(operation at a rate of 300Bps on telephone line),
2. permit operation to be configured only in one of these formats (the function of automatic
format negotiating disabled).
Before starting the first connection between the computer and the control panel,
appropriate settings must be entered in the DLOAD10 program (CONFIGURATION
window). Information on the modem configuration is contained in the DLOAD10 program
„HELP” file (function activated with F1 key), topic: “COMMUNICATION” and in chapter
PROGRAM CONFIGURATION FOR COMMUNICATION WITH THE PANEL of this manual. In the case of
non-standard modems, you must refer to the modem manual for the information on
configuration procedures.
Interaction with the computer by means of a modem can be effected in two ways: in
a remote mode (through the telephone line) or in a local mode. The local mode can be
used after connecting the modem directly to the TIP and RING telephone terminals on the
control panel (see: Fig. 14).
CA-6
control panel
telephone
connector
connector
synthesizer
to modem
resistor
220
(+12V)
(COM)
T-1
R-1
RING
TIP
mainboard
Fig. 14. Connecting control panel to modem for local mode programming.
Local communication:
connect the computer modem to the “TIP” and RING” control panel terminals
(the telephone line must be disconnected! Connections of the “T-1” and „R-1”
terminals are irrelevant), and make sure that the polarity of the telephone signal inputs
arrangement in the control panel is as shown at the Fig. 14;
start the DLOAD10 program, select the CA6 control panel type (e.g. by opening the
data of such a panel) and, from the menu Communication”, select Modem and
„local” or „CA-6 without keypad” connection mode. Further procedure will be prompted
by the program. The „CA-6 without keypad” command in the Initializing modem”
window enables to automatically run the program from the computer with no need for
operating the control panel from keypad and calling the function FS112. This feature
can be disabled by the installer with software means, with the use of function FS131
(option 2);
program the communication passwords – communication passwords in the control
panel (FS2 and FS3) and in the alarm system computer data must be identical;
enable the „external downloading” option (FS5).
Note: When starting communication with the function FS112, make sure that the function
FS112 is only called when the modem starts sending signal to the control panel
-
there can be a few seconds lag in some modems.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info