699578
30
Zoom out
Zoom in
Previous page
1/36
Next page
28 SATEL Installer Manual
DLOAD10 program
The DLOAD10 program, delivered with the control panel, is designed for programming the
CA-5, CA-6, CA-10 control panels, as well as the RX-2K, RX-4K and RE-4K radio controllers,
the GSM-4 module and the ACU-100 wireless system controller, from the computer.
Additionally, the program makes it possible to create: documentation of alarm systems, sets
of programmed system parameters for various configurations ("patterns" which facilitate the
programming of new systems), event sets for each system. It also enables to remotely
operate the control panel in the same way as with the keypads.
The program is designed for IBM PC/AT compatible computers. It works in any computer
hardware configuration in the WINDOWS (9x/ME/2000) environment. It is recommended that
the program be installed on the computer hard disk.
The control panel communicates with the computer through the RS-232 (TTL) port or via the
telephone line. For telephone communication with the panel, the program uses a modem
controlled by one of the COM ports (internal or external), compatible with the HAYES
"AT Command" standard. Communication with the control panel is possible in the
CCITT V.21 or BELL 103 standards (at 300 Bps). As the control panel transmits data only
with a speed of 300 bauds, the modem must support this speed of operation.
Usually a suitable modem configuration is necessary: 300 bps speed and disabled
function of negotiating the transmission standard.
In order to install the program, run the D10setup.exe program from a CD-ROM delivered
with the control panel. When installation is completed, you can start the program. Access to
the program is protected with an access code. After installation, the code is [1][2][3][4] and
can be changed to any sequence of 16 alphanumeric characters. As long as it is set by
default, you can start the program (with default code [1][2][3][4]) by pressing the „ENTER”
key (no access code need to be entered).
Having started the program, you should choose in the computer a proper configuration and
initialize the work of RS port or modem by means of which the control panel will be
programmed. By default, the program opens the CA-10 window. Than you can select the
CA-6 control panel and start the connection (either remote or local).
A HELP system, which facilitates operating of the DLOAD10 and programming of the control
panel parameters, is provided. The system is accessible from the „HELP menu, or by
pressing the F1 key on the computer keyboard. To get an instant access to more detailed
information, first select the required element in the program window (by clicking on it with the
left mouse button), and then press the F1 key.
Program configuration for communication with the control panel
In order to begin configuration, click on the icon to open the Configurationwindow.
The Port RS-232tab permits selecting the computer port number in the case of direct
programming through the panel RS port. If the control panel is being programmed by
means of the modem, select the „Modem” tab and click on the „Details” button.
The modem communication can be started by clicking on the icon (or selecting the
„Modem” command from the „Communication” menu). The program will open a dialog box
enabling connection to be established and will prompt the further course of action. For
details see the section „Remote programming – DOWNLOADING”.
The type of control panel is recognized automatically on establishing connection, or can be
selected through the „File” menu.
Calling the function of reading the control panel data (icon
) after the communication
has been established may speed up the subsequent process of saving the changes in the
control panel settings.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info