699578
17
Zoom out
Zoom in
Previous page
1/36
Next page
CA-6 SATEL 15
COM +KPD DATA CLK Z1 COM Z2
+KPD CLK Z1 Z2DATA COM
CTL Z2
D C B A
CA-6 KLED
keypad
backlight
Control panel mainboard
keypad
Zone 7 Zone 8
Fig. 4. Connection of keypad to control panel.
The DCBA keypad jumpers determine the address which is an additional tamper protection.
The pins D and A are shorted by default; it is possible to change the address (see: FS111,
FS124). The panel does not accept addresses of the „all closed” and „all open” type
addresses. The address is stored in the panel EEPROM (non-volatile) memory, together with
the other system parameters.
The keypad Z1 and Z2 terminals permit connecting any detectors. They are supported by
the control panel in the same way as the mainboard zone inputs. The keypad Z1 terminal is
treated as zone 7, Z2 – as zone 8.
Provision is made for connecting additional keypads (in parallel with the first one). Each
keypad should be connected to the control panel by means of a separate cable.
The address of all keypads should be identical, the zone 7 and 8 can only be used in
one of them, elsewhere they should be left open (nothing is to be connected).
There are two types of keypads designed to work together with the CA-6 control panel. All of
them should be connected in the way shown in Fig. 4 for the CA-6 KLED keypad. For
description of the CA-6 KLED-S terminals, see the figure below.
Fig. 5. View of the CA-6 KLED-S keypad board.
WIRE CONNECTION
TAMPER CONTACT
KEYPAD ADDRESS
BUZZER
D
C
B
A
Z2 COM Z1
KPD CLK DTA
TERMINAL DESCRIPTION
KEYPAD
CONTROL PANEL
KPD
+KPD
DTA
DATA
CLK CLK
COM COM
Z1 – to
detector
Additional system
zones
Z2 – to
detector
Z2 COM Z1
KPD
CLK
DTA
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Additional guide - English - 40 pages

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info