699608
10
Zoom out
Zoom in
Previous page
1/15
Next page
8 SATEL CA-4v1
LEDs will indicate which of the functions are activated (a LED on signals activity of a
function). The number of the function to be blocked or unblocked should be entered.
After unblocking of the chosen functions the [#] key should be pressed. The following
functions are possible:
1 alarm upon entering three wrong access codes,
2 PANIC alarm available,
3 the entry delay countdown signaling,
4 access code number 3 activates silent armed mode (signaling with the devices
attached to outputs OUT1 and OUT2 is deactivated – the alarm condition is signaled
through the keypad sounder).
The zones bypassed with access code 3 arming (function 9)
Enter any of the two master access codes and press the [
*
] key. The panel will confirm
the correct code entry with two beeps and will wait for the function number entry (the
[TROUBLE], [ARMED] and [ALARM] LEDs will blink simultaneously). Press the
9 key. After entering the programming mode (the panel will confirm the entry with three
beeps, the [TROUBLE], [ARMED] and [ALARM] LEDs will blink in turns) the
zones' numbers to be additionally bypassed should be entered. After programming the
panel the [#] key should be pressed.
Programming
Programming the panel enables its users to adjust it to specific requirements of an alarm
system.
In CA4-V1 the following parameters are user-programmable:
bypassing zones (for example, not used),
set delay zones (for protected facility easy entry),
set 24-hour zones,
entry delay time,
exit delay time,
the OUT1 output alarming time,
the OUT2 output alarming time, or the signaling mode of the output.
Programming is possible with 10 service functions which are available the panel's activation
in the service programming mode with a special service code. The mode is sustained until
deactivated with an appropriate function.
On entering the programming mode the panel blocks any alarms showing only zone status.
The [TROUBLE], [ARMED] and [ALARM] LEDs blink simultaneously and on
activating the function program the LEDs blink in turns.
Service functions
Below there is a list of all available service functions. The panel sound reactions to keys
pressed are marked with dots where one dot = one beep.
If the reaction to a key pressed are two long sounds it means that the wrong key has been
used. In such case the parameter being programmed won't be changed.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-4v1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-4v1 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info