699608
11
Zoom out
Zoom in
Previous page
1/15
Next page
CA-4v1 SATEL 9
FUNCTION 0 – exit service mode
Activating sequence: 0.#...
FUNCTION 1 – service code programming
Activating sequence: 1.#...
Example: programming new code: 89354
8.9.3.5.4.#...
FUNCTION 2 – permanent zone bypassing
Activating sequence: 2.#...
Example 1: bypassing zone number 2 and 3
2.3.#...
Example 2: unbypassing zone 3
3.#...
FUNCTION 3 – 24 hour zones (are active although the system is not armed)
Activating sequence: 3.#...
Example: zone 4 is to be changed into 24 hours type
4.#...
FUNCTION 4 – delayed zones (the zones of this type activate the alarm after the time
specified by using function 6)
Activating sequence: 4.#...
Example: zone 1 and 2 are to be changed into delayed type
1.2.#...
FUNCTION 5 – programming the exit delay time (from 0 to 99 seconds)
Activating sequence: 5.#...
Example: the exit delay time is to be set to 30 seconds
3.0...
FUNCTION 6 – programming the entry delay time (from 0 to 99 seconds)
Activating sequence: 6.#...
Example: the entry delay time is to be set to 8 seconds
0.8...
FUNCTION 7 – programming the alarm time at OUT1 output (from 001 to 999
seconds, for 000 the exit is active even until the alarm has been
cancelled)
Activating sequence: 7.#...
Example: the alarm time is to be set to 5 minutes (300 seconds)
3.0.0...
FUNCTION 8 – programming the alarm time at OUT2 output (the output signals the
alarm after being programmed to 001 through 998 seconds) or the way of
armed status signaling (000 – 0V at OUT2 when the panel is armed; 999 –
+12V at OUT2 when the panel is armed).
Activating sequence: 8.#...
Example: the alarm time is to be set to 5 seconds
0.0.5...
FUNCTION 9 – default settings restore. The following values are pre-programmed:
access code 1 1234
access code 2 not pre-programmed
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-4v1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-4v1 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info