699577
52
Zoom out
Zoom in
Previous page
1/60
Next page
50 Programming SATEL
FS135 - programming codes to unbypass the control panel zones (HEX)
The codes programmed with this function are sent after calling the user function 4 and
unbypassing the control panel zones. The codes are programmed in the same way as the
other zone events codes (FS60 – FS66).
Monitoring
FS136 – programming of prefix for extension of identifiers in TELIM transmission
format
(Transmission format used in Germany.)
FS137 - programming codes to be sent to the monitoring station in TELIM
transmission format
(Transmission format used in Germany.)
Monitoring – programming of identifiers
FS-138 - programming of VISONIC radio system address (DEC)
The address may take a value from 0 to 7.
During the programming in the LED keypads two digits should be entered – first 0, second
should correspond the address.
EXAMPLE (for the LED keypad):
programming of address „5”.
[1][3][8] [#] - call the function,
[0][5] [#] - enter the address and exit the function.
FS-139 - programming the test transmission period for VISONIC radio system (DEC)
The function sets time intervals between sequential autotests which are transmitted over
radio. First the number of hours should be set and next the number of minutes. The maximal
value of programmed time interval is 99 hours and 99 minutes.
EXAMPLE (for the LED keypad):
programming of time interval of 1 hour and 15 minutes.
[1][3][9] [#] - call the function,
[0][1] [#] - enter the number of hours,
[1][5] [#] - enter the number of minutes and exit the function.
Note: The service functions FS138 and FS139 refer only to control panels having PC board
marked with the „VC-10P" symbol.
Monitoring - programming system report codes
FS140 – programming the time of test transmission to the monitoring station when
system is armed
Function makes it possible to program a separate period of the test transmission, valid only
when the system is armed. The control panel, when system is armed, send the test code to
the monitoring station every period of time specified in the given function. If a new event
occurs and the panel sends its code to the monitoring station, then the counting of the
programmed time starts from the beginning. When 00, 00, 00 value is entered, then,
irrespective of whether the control panel is armed or not, only the time programmed in
FS 133 is used
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info