699577
45
Zoom out
Zoom in
Previous page
1/60
Next page
SATEL CA-10 43
The keypad addresses are set by the panel automatically after the reading with the service
function FS124 or when restoring the default settings FS107. The function FS111 enables
the addresses to be checked and programmed manually from keypads.
Note: In a system equipped with LCD keypads, manual modification of the keypad
addresses with the function FS111 is not allowed.
In the LED keypads the programming consists in lighting up the LEDs which correspond to
the jumper settings. It is performed in two steps. In the first step, the LEDs 1 to 4 show the
address of partition keypad 1 (CLK1), and the LEDs 5 to 8 - the address of keypad 2 (CLK2).
In the second step, the addresses of keypad 3 (CLK3, LEDs 1 to 4) and keypad 4 (CLK4,
LEDs 5 to 8) are set. The settings are confirmed with the [#] key.
The [
*
] key enables you to exit the function.
Figure 3. An example of jumper setting in the first partition LED keypad and LED signaling in
CA-10 KLED
Notes:
The control panel does not support LED keypads in which either all jumpers or no
jumpers are set, as well as LCD keypads in which the address 0000 or 1111 has been
programmed.
When programming the keypad addresses be particularly careful, as having
programmed wrong addresses will trigger a tamper alarm on quitting the service mode
and loss of the ability to control the panel from the keypad. Then it is necessary to enter
the service mode by hardware means and read the new addresses (see: Installer
Manual).
The new addresses (as most of the programmed parameters of the panel) will become
valid after exiting the service mode or - when the panel is being programmed from the
computer - after the data are sent.
FS112 - start of programming through RS-232
The function starts the panel programming through the RS-232 interface.
Prior to using the function:
hook up the control panel to the computer (see: Installer Manual);
keypad 1
counter keypad 2
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info