699577
20
Zoom out
Zoom in
Previous page
1/60
Next page
18 Programming SATEL
FS10 - zones assignment to partition 3 (BIT)
FS11 - zones assignment to partition 4 (BIT)
The functions FS8 - FS11 are used to divide the alarm system into partitions. Description of
the control panel division into partitions - see the Installer Manual.
In the LED keypads, the zones are assigned to a partition in two stages. In the first stage
(LED 12 blinking), the zones from 1 to 8 are programmed, in the second stage (LED 11
blinking), the zones from 9 to 16 are programmed (LED 1 indicates then zone 9, LED 2 -
zone 10, etc.). You can proceed to the second stage by pressing the key [#]. Assignment of
the zones to a partition is effected by pressing the keys from 1 to 8 and indicated by lighting
of the LED representing the particular zone. Having programmed all the zones, press the key
[#] to save the entered data and quit the function.
In the LCD keypads, the zones can be assigned to partitions by entering the corresponding
zone number (zones 1-9 by pressing the numeric key, zones 10-16 by pressing, in turn, the
key [
*
] and the numeric key from 0 to 6, zones 10-16 being displayed by means of letters A
to G), or using the arrow keys (arrows and enable movement of the cursor, arrow
assigns a zone to or deletes a zone from partition, while arrow displays the name of zone
selected by the cursor). Pressing the key [#] will result in saving the entered data and quitting
the function.
FS12 - programming zones displayed in partition 1 keypad (BIT)
FS13 - programming zones displayed in partition 2 keypad (BIT)
FS14 - programming zones displayed in partition 3 keypad (BIT)
FS15 - programming zones displayed in partition 4 keypad (BIT)
Provision is made in the control panel for optional selection of the zones to be displayed in
the given keypad. This option refers mainly to the LED keypads i.e. to the CA-10-KLED and
the CA-10-KLED-S, which was produced until February 2006 (they display the status of 12
out of 16 zones). In the newest CA-10-KLED-S keypads (version 2.2 and latest) this function
has no meaning since the state of all zones from 1 to 16 is displayed. In the LCD keypads,
the functioning of this option is limited to the mode of LED standard display. The zones
which are to be shown in the keypad are displayed in the ascending order, while the zones
which are not to be shown are skipped. For example, if the zones 2, 3, 5 and 7 are selected
for display in the keypad, the status of zone 2 is displayed on the first LED, zone 3 status –
on the second, zone 5 – on the third, zone 7 – on the fourth, while the other LEDs will remain
unused.
The programming is similar to that in FS8 – FS11 (zones assignment to partition).
FS16 - programming auto-bypassed zones in partition 1 (BIT)
FS17 - programming auto-bypassed zones in partition 2 (BIT)
FS18 - programming auto-bypassed zones in partition 3 (BIT)
FS19 - programming auto-bypassed zones in partition 4 (BIT)
The functions 16 to 19 apply to the zones which are automatically bypassed after silent or
loud arming with the authority level 7 code (partial arming). The programming is similar to
that in FS8 – FS11.
Note: The zones to be bypassed at no exit from the partition are programmed with the
service functions FS 127
÷
130 (EXIT-BYPASS).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info