699577
13
Zoom out
Zoom in
Previous page
1/24
Next page
CA-10 SATEL
11
In the LED keypad, the
[
TROUBLE
] and [
ARMED
] will go on, the
[
ALARM
] LED
will start blinking, while information on the last alarm will be shown on the LEDs 1-12.
Pressing any key (except for the [
*
] key, which stops viewing the alarms log
immediately), you can reach information on the previous alarms, until the end of the
events log. In the LCD keypads, the S
T keys make it possible to scroll through the
alarms log, and the W
X keys to get some extra information on the alarm source.
The panel signals three types of alarms: zone alarms, tamper zone alarms and keypad
activated alarms. In the LED keypads they are indicated as follows:
zone alarms: one of the LEDs 1-12 / 1-16 is steadily on
(burglary alarms, panic
alarms, fire alarms etc. depending on how the functions of the zones were set up
by the installer)
tamper alarms of 2EOL type zones: one of the LEDs 1 to 12 / 1-16 is blinking
(this type of alarm signals an attempt to dismantle or damage detectors or alarm
system wiring),
keypad activated alarms: the LEDs 1 to 8 are steadily on and two LEDs - one in
the 1 to 5 range and one in the 9 to 12 range - are blinking.
The LEDs have the following meaning:
1 - fire alarm keypad activated
2 - auxiliary alarm keypad activated
3 - panic alarm keypad activated
4 - tamper keypad alarm
5 - three wrong access codes alarm
9 - alarm activated in partition 1
10 - alarm activated in partition 2
11 - alarm activated in partition 3
12 - alarm activated in partition 4
Viewing troubles log [6]
The function allows the panel user to reproduce information about the system trouble
conditions from the panel memory log.
After calling the function in the LCD keypad, the message "View troubles log
ÇÈÅÆ
"
will be displayed. Pressing any of the arrow keys causes the date, time, and last trouble
type detected name to appear. On pressing S key the list of previously detected
troubles is displayed, on pressing T key the list of subsequent troubles.
After calling the function in the LED keypad, the
[
ALARM
] and [
ARMED
]
LEDs will,
the
[
TROUBLE
] LED will start blinking, and one of the LEDs 1 to 12 will indicate the
kind of trouble. The LEDs have the following meaning:
1 - output 1 trouble,
2 - output 2 trouble,
3 - output 3 trouble,
4 - 230VAC loss
5 - battery trouble
6 - keypad power supply trouble
7 - time not set
8 - printer trouble
9 - telephone line loss
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info