699577
11
Zoom out
Zoom in
Previous page
1/24
Next page
CA-10 SATEL
9
tone followed by a 4-second pause - this signal corresponds to the telephone
ringing tone) hang up and call again (within 5 minutes) - the panel will answer the
second call immediately.
The installer decides if the function is to be activated and how the control panel will
answer the phone calls (number of rings, double calling, etc.)
Control panel interfacing with DTMF (MST-1) control module
The control panel can support a module which can enable the user to perform remotely,
by means of a telephone and DTMF signals, the following operations:
check the state of partitions (armed, alarm)
check the state of zones (which of them are violated)
arm / disarm
clear alarm
bypass / unbypass zones
silent arming
control the MONO switch and BI switch outputs
The control panel may be controlled from a telephone set which the control panel is
calling during voice messaging (immediately after playback of the message from the
voice synthesizer) or, after establishing connection, from any other telephone. Details
regarding the control panel operation - see the manual for MST-1 module.
Functions of
◄▲▼► Key in the LCD Keypads
Activated by installer functions assigned to ◄▲▼► keys help in everyday control of
the system operation. The function is called by pressing the corresponding key. The
installer can disable the functions described below.
Find the partition where alarm was activated S key
In multi-partition systems the find function enables determining the partition where alarm
was activated. On calling, the function shows by means of [
ARMED
] LEDs the
partitions where alarm was activated, and on the LCD display the names of partitions
(every time the S key is pressed next partition name is shown).
Find the violated zones W key
The function displays the names of violated zones. The zones are shown on pressing
the W key (the function shows the partition zones as selected by the installer).
Find the zones that caused the alarm X key
The function displays the zone names for which the alarm has not yet been cleared
(individual alarm memory for zones). Every time the X key is pressed next zone name
is shown.
Find the partition where the keypad is attached T key
The function displays the name of the basic partition operated with a keypad (the
partition to which the keypad is physically attached).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info