699577
34
Zoom out
Zoom in
Previous page
1/43
Next page
32 Installer Manual SATEL
for a correct operation of most older-generation modems (i.e. modems with a maximum
speed of 2400 Bps). The fast modems of a new generation require some extra commands
being added to limit their operation speed.
Remote communication procedure:
program in the control panel:
FS2: control panel identifier by which the program recognizes the alarm system
FS3: computer identifier by which the control panel recognizes the computer
authorized to establish connection
FS4: computer telephone number (which is not necessary)
FS5: “external DOWNLOADING” option, “double call” option (any setting) and the
FS101 number of rings before answer – if communication is to be initiated from the
computer
start the DLOAD10 program, select the CA-10 control panel and its version, e.g. by
opening the data of such a panel and select the “MODEM” item from the
„COMMUNICATION” menu.
Note: The communication identifiers and the „double call” option settings must be identical
in the control panel and in the alarm system computer data.
Telephone connection with the control panel will be set up automatically after selecting any
communication command in the program (Read, Write, Event log read, ON-LINE mode).
You can also start communication from the panel with the user function 0.
Telephone communication error messages:
modem not responding the modem has not acknowledged the dialed number
(a rare case, usually a problem caused by modem hardware or e.g. missing the “V1”
initializing command),
“panel not responding”, “no panel's carrier”, “no panel's initial greeting”
“insufficient line quality or bad PC's communication password!”, “panel's
communication password does not match PC data”:
connection with the control panel was unsuccessful,
the control panel was off hook but did not answer the modem signal because it was
much corrupted,
the control panel was off hook but did not answer the modem signal because it was
not in the transmission format V.21 or BELL 103 (incompatible or incorrectly
configured modem),
the control panel established connection, but the identifiers in the control panel and
computer are different – the panel disconnects,
connection interrupt” – the control panel stopped answering the computer signals.
Note: If the control panel answers the call but fails to establish communication and
disconnects, while the “double call” option is deactivated, it will be answering no
calls for the next 5 minutes.
Programming the LCD keypad from the computer
Programming the LCD keypad data is only possible in the local mode. You can program the
following data:
keypad options,
names of zones, partitions and outputs,
message contents,
user names.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info