Manual Sanitas SEM 43 (page 24 of 68) (English, German, French, Italian)

579874

Zoom out

Zoom in

1/68

7.3 Setting individual parameters

7.3.1 Setting the treatment time

Using the UP/DOWN buttons, select the desired treatment

time. You can set a treatment time from 5 minutes to 100 minutes

(Fig. 4, Example treatment time of 20 min.). Confirm your

selection with the E button. The stimulation treatment begins and

the operation status display starts to flash alternately (Fig. 5).

7.3.2 Setting individual TENS programs

Procedure for TENS 08 program

TENS 08 is a preset program that you can also personalise. In this program you

can set the impulse frequency to between 1 and 150 Hz and the impulse width

to between 50 and 250 μs.

•

Place the electrodes on the desired area for treatment (for

positioning suggestions see electrode positions, p. 2) and

connect them to the device. Select the TENS 08 program, as

described in section 7.2 “Selecting a program” (p. 23).

•

Using the UP/DOWN buttons, select the desired impulse

frequency and confirm with the E button (Fig. 1, Example

impulse frequency of 100 Hz).

•

Using the UP/DOWN buttons, select the desired impulse width

and confirm with the E button (Fig. 2, Example impulse width

of 200 μs).

•

Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

•

Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

Procedure for the TENS 09 program

TENS 09 is a preset burst program that you can also personalise. In this pro-

gram, you can set the impulse width to between 50 and 250 μs.

•

Place the electrodes on the desired area for treatment (for positioning sugges-

tions see electrode positions, p. 2) and connect them to the device. Select the

TENS 09 program, as described in 7.2 “Selecting a program” (p. 23).

•

Using the UP/DOWN buttons, select the desired impulse width

and confirm with the E button (Fig. 1, Example impulse width of

200 μs).

• Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

• Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

Procedure for the TENS 10 program

TENS 10 is a preset program that you can also personalise. In this program,

you can set the impulse frequency to between 1 and 150 Hz. The impulse width

changes automatically during the stimulation treatment.

•

Place the electrodes on the desired area for treatment (for positioning

suggestions see electrode positions, p. 2) and connect them to the device.

Select the TENS 10 program, as described in 7.2 “Selecting a program”

(p. 23).

•

Using the UP/DOWN buttons, select the desired impulse fre-

quency and confirm with the E button (Fig. 1, Example impulse

frequency of 100 Hz).

•

Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

•

Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

7.3.3 Setting individual EMS programs

Procedure for the EMS 28 program

EMS 28 is a preset program that you can also personalise. In this program, you

can set the impulse frequency to between 1 and 100 Hz and the impulse width

to between 50 and 320 μs.

•

Place the electrodes on the desired area for treatment (for positioning sugges-

tions see electrode positions, p. 2) and connect them to the device. Select the

EMS 28 program, as described in 7.2 “Selecting a program” (p. 23).

•

Using the UP/DOWN buttons, select the desired impulse

frequency and confirm with the E button (Fig. 1, Example

impulse frequency of 30 Hz).

Fig

. 4

Fig

. 5

Fig

. 1

Fig

. 2

Fig

. 1

Fig

. 1

Fig

. 1

can I stick the electrodes high on my back? between the shoulder blades? or is this dangerous because it's too close to the heart? Submitted on 28-2-2020 at 09:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SEM 43 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanitas SEM 43 Manual

Product: