Manual Sanitas SEM 43 (page 25 of 68) (English, German, French, Italian)

579874

Zoom out

Zoom in

1/68

•

Using the UP/DOWN buttons, select the desired impulse

width and confirm with the E button (Fig. 2, Example impulse

width of 250 μs).

•

Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

•

Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

Procedure for the EMS 29 program

EMS 29 is a preset program that you can also personalise. In this program, you

can set the impulse frequency to between 1 and 100 Hz. The impulse width

changes automatically during the stimulation treatment.

•

Place the electrodes on the desired area for treatment (for positioning

suggestions see electrode positions, p. 2) and connect them to the device.

Select the EMS 29 program, as described in 7.2 “Selecting a program”

(p. 23).

•

Using the UP/DOWN buttons, select the desired impulse fre-

quency and confirm with the E button (Fig. 1, Example impulse

frequency of 30 Hz).

•

Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

•

Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

Procedure for the EMS 30 program

EMS 30 is a preset program that you can also personalise. In this program, you

can set the impulse frequency to between 1 and 100 Hz. You can also set the

working time and pause time for this program to between 1 and 30 seconds

each.

•

Place the electrodes on the desired area for treatment (for positioning

suggestions see electrode positions, p. 2) and connect them to the device.

Select the EMS 30 program, as described in 7.2 “Selecting a program”

(p. 23).

•

Using the UP/DOWN buttons, select the desired length of

working time and confirm with the E button (Fig. 1, Example

working time of 2 seconds).

•

Using the UP/DOWN buttons, select the desired length of

pause time and confirm with the E button (Fig. 2, Example

pause time of 10 seconds).

•

Using the UP/DOWN buttons, select the desired impulse

frequency and confirm with the E button (Fig. 3, Example

impulse frequency of 30 Hz).

•

Select the desired treatment time, as described in

7.3.1 “Setting the treatment time” (p. 24).

•

Select the desired impulse intensity, as described in

7.2 “Setting the impulse intensity” (p. 23).

7.4 Changes to the settings

Changing intensity (during application)

•

+/-

und

+/-

: Changing the intensity for each channel.

Interrupting stimulation

Press the ON/OFF button

Changing application (completely or single parameters)

•

ON/OFF button : to interrupt stimulation

•

Setting the program, see 7.2; setting individual parameters, see 7.3.

7.5 Doctor’s Function

Doctor’s Function is a specific setting to allow you to call up your specific per-

sonal programme even more easily.

Your individual program settings are instantly recalled and activated when the

device is switched on.

Settings for this individual programme may, for example, be on the advice of

your doctor.

Setting the Doctor’s Function

•

Select your programme and appropriate settings as described under 7.2 or

7.3.

•

At the start of the stimulation treatment, the impulse intensity of and

is set to 00 as default. No impulses are sent to the electrodes yet. Be-

fore setting the desired impulse intensity using the intensity setting buttons,

press and hold the

button for 5 seconds. Storage in the Doctor’s Func-

tion is confirmed with a long acoustic signal.

Fig

. 2

Fig

. 1

Fig

. 1

Fig

. 2

Fig

. 3

can I stick the electrodes high on my back? between the shoulder blades? or is this dangerous because it's too close to the heart? Submitted on 28-2-2020 at 09:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SEM 43 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanitas SEM 43 Manual

Product: