623977

Samson AirLine Synth Wireless System Manual

18
Zoom out
Zoom in
Previous page
1/24
Next page
AR300/AX300 Operation
Setting a Group and Channel Manually
The AR300 receiver contains 320 selectable channels for N and U band, and 71
selectable channels for E band. All channels are organized into a series of groups.
Each group contains channels that are compatible for simultaneous use. When using
multiple systems, each system should be assigned to the same group in order to
maximize the number of compatible channels. Each group is designated with a letter,
followed by the group channel number (0–9) which is displayed under the “GROUP”
icon in the AR300 LCD display.
To the right of the Group and Group Channel number is the readout Absolute channel
number. This three-digit Absolute Channel number corresponds to the exact channel
from the entire channel plan. That Absolute Channel number is shown on the AX300
transmitter’s LCD display.
The AX300 displays the Absolute Channel number in its LCD for a few seconds, and
then the display shuts off to preserve battery power. You can also see the transmitters
Absolute Channel number by switching the Mute on. In addition, the AX300 will also
display the Absolute Channel number briefly when the power is shut off.
1. Press the EDIT control once and you will see the Group and Group Channel Number
Flash.
2. Turn the EDIT controller and you will see the Group and Channel number change,
and you will also see the Absolute Channel number change in sync.
3. If you prefer, you can choose the Absolute Channel. Simply press the EDIT control
again until the Absolute Channel number flashes. Then, turn the EDIT controller
and you will see the Absolute Channel number change. It changes in sync with the
Group and Channel number.
4. Once you have the desired channel set on the AR300 you’re ready to transmit the
infrared channel data to the AX300. Have the transmitter ready in your hand with
the Power switch set to off.
5. Double click the EDIT controller and you will see the display flash “IR SET” indicating
that the AR300 is sending the channel information over infrared transmission.
6. Now, position the transmitter about 6-inches from the front of the AR300 with the
AX300 IR receiver facing the AR300’s LCD display and turn the power switch on.
You will now see the corresponding Absolute Channel in the AX300 LCD display
indicating that the transmitter is matched to the receiver.
18
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson AirLine Synth Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info