623977

Samson AirLine Synth Wireless System Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
6. Make the physical cable connection between the AR300 output jack and an audio
input of your mixer. Leave your mixer and power amplifier off at this time.
7. Turn the Level knob on the AR300 completely counterclockwise, then set its Power
switch up to turn it on. The LCD display light will illuminate.
8. Now to set the channel, press and hold the EDIT control until the display reads CH
SCAN. Next, the AR300 will automatically find the clearest channel and you will see
it in the Channel number of the display just before the IR SET will begin.
9. Once you see the IR SET flashing in the LCD display, hold the transmitter, with the
bottom facing towards the AR300, approximately 6 inches away from the receiver
and turn the AX300 power switch on. The AR300 will transmit the channel number
to AX300 over infrared light and you will see the corresponding absolute channel
number in the transmitter LCD.
10. The RF Meter on the AR300 receiver should now be active, indicating that it is
receiving valid RF signal and is placed and positioned correctly.
11. Now it’s time to set the audio levels. Turn on your mixer and/or amplifier but
keep its volume all the way down. Plug the AX300 into the included Samson Q7
or any dynamic microphone. Begin speaking or singing at a normal performance
level while observing the AR300 AF Meter. If all the bars are lit, indicating a Peak
condition, even with the AR300 Level control fully counterclockwise, turn the
Gain control down. If the AF Meter bars are showing a weak level, slowly turn the
AX300’s Gain control clockwise to the point where the AF Meter reaches ‘‘0” during
the very loudest passages, then back it off just slightly; this will ensure maximum
signal to noise ratio. Now, raise the Level on the AR300. Finally, raise the level of
your mixer and/or amplifier until the desired volume is reached.
Setting Up Your AirLine Synth System
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson AirLine Synth Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info