623977
15
Zoom out
Zoom in
Previous page
1/24
Next page
The basic procedure for setting up and using your AirLine Synth system takes only a
few minutes:
1. Remove all packing materials (save them in case of need for future service) and
check to make sure that the supplied power adapter is the correct voltage for your
country. If not, contact your distributor or, if purchased in the United States, Samson
Technical Support at 1-800-372-6766.
2. Physically place the AR300 receiver next to your mixer. The general rule of thumb is
to maintain “line of sight between the receiver and transmitter so that the person
using the transmitter can see the receiver.
3. Extend the AR300 antennas and spread the tips horizontally outwards at least 5
inches.
4. Make sure the Power On-Off switch in your AX300 transmitter is set to “Off and
that the MUTE is also set to “ON”. Pull back gently on the AX300 battery cover at
the ribbing and pry it upwards to remove it. Please use care when opening this
cover as undue force can damage it. Install a fresh AA alkaline battery in the battery
compartment, being sure to observe the polarity markings. Then carefully replace
the battery cover and gently press down on it until it clicks. Momentarily turn on
the power to the transmitter by sliding its Power On-Off switch in the direction of
the arrow; the “Power/Battery LED will flash if the battery is sufficiently strong (if it
lights steadily, the battery has less than 2 hours of power remaining and should be
replaced). Once battery strength is verified, turn the transmitter off again and place
it aside for now.
5. With the Power switch on the AR300 set to the “Off position, connect the included
power adapter. Turn the AR300 on momentarily to confirm that the unit is receiving
power. You’ll see the LCD display light up. Then turn the AR300 power off.
Setting Up Your AirLine Synth System
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson AirLine Synth Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson AirLine Synth Wireless System in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info